screws for side plate 2240

[brz-ryder †]

Does anyone know what size screws are used to fix the side plate to the grip frame on a 2240 ?

Thanks Jim

[rangerfredbob]

If it's a 3 screw side plate it's for sure 4-40 screws, I just checked...

[brz-ryder †]

thanks alot thats what i thought wasn`t sure. The two screw side plates take the same screw them they didn`t change just the number of screws when they went from metal to plastic


Jim

[blake.l]

Little late but this might help you also...

Trigger Sides 2 - 4-40x3/8" Flat - 1/16" Hex
Grips 2 - 6-32x1/2" Flat - 5/64" Hex
Rear Breech Long - CR Plastic 1 8-32x7/8" Button - 3/32" Hex
Rear Breech Short - CR Steel 1 8-32x3/4" Button - 3/32" Hex
Front Grip Frame 2240 1 - 8-32x1/4" Button - 3/32" Hex
Front Grip Frame 2250 1 - 8-32x3/8" Button - 3/32" Hex
Rear Grip Frame 22xx 1 - 8-32x7/16" Button - 3/32" Hex
Fore Stock 2250 2 - 5-40x1/4" Button - 5/64" Hex
Valve Screw - 6x1/8"
Breech Screw 4x48 (length is 9/32 including the shallow head)
2x #8-32x1/8" Set Screws (Fits Barrel Bands, Barrel Set Screw

[brz-ryder †]

thanks Blake thats one good list i`ll copy it for refrence i`m putting together a rebolt kit for my 2240 in brass has to be Phillips as the only place i found with the smaller screws in brass don`t carry them in allen heads wish i could find them oh well least now i can get the whole set in brass now thanks guys


Jim

[quickster47 †]

Little late but this might help you also...

Fore Stock 2250 2 - 6-40x1/4" Button - 5/64" Hex

Need to correct this one.  The 2250 forestock screws are 5-40 x 1/4".

Carl

[blake.l]

Need to correct this one.  The 2250 forestock screws are 5-40 x 1/4".

Carl

Thanks for letting me know Carl, should be correct now..

[quickster47 †]

Good deal.  That is an excellent list and I thank you for putting it together.  It's handy to keep around.

Here is another one for Crosman barrels.  I think it is up-to-date but it might be missing one.

Replacement barrels for a 13xx rifle or pistol longer than 10.25" require modification or replacement of the front band due to their length. This simply requires drilling the hole in the factory front band to 7/16". Replacement of the band can be accomplished with the 2289 band and screw P/N 788b011 and 781a012 or other after market parts. Note: the 2289 band does not have a front sight post like the factory band. If you still wish to use open sights you need a barrel mounted sight P/N 788-101 standard or 760-201 fiber optic.

.177 (4.5mm)
Length      Original Gun      Crosman P/N
7.5"      2240 Only      1740-002
10.25"      1377         1377-025
10.1"       Lothar Walther Match   2300   2300-102
24"      1760         1760-001

.22 (5.5mm)       
Length      Original Gun      Crosman P/N
7.5"      2240 Only      2240-002
10.25"      1322         1322-064
14.5"      2289         2289-001   Has no dimple, no barrel band.
14.5"      2250         2250-019   Has dimple for barrel band.
18"      2400         2400-102
24"      2260         2260-003

Carl

[brz-ryder †]

Kool i now have all i need for building a brass rebolt kit the only problem is no one makes brass screws with allen tops only sloted or phillips guess i`m going phillips they should be here by Wed wohooo

Jim