So I got my LPA Mim sight today

[TLEVTA]

And the windage adjuster works fine. But how about the elevation? Clockwise for up or down? Gun is currently apart waiting for an aftermarket piston, so I can't check for myself.

[JEBert]

Can you adjust it enough to see if it is getting taller or shorter?

[breakfastchef]

C. Sight Adjustment

• Elevation - turning the elevation screw clockwise will move the sight (and point of impact) down. Turning the elevation adjustment screw counter-clockwise will move the sight (and point of impact) up.

[TLEVTA]

Thanks, Larry. I didn't really want to crank on the screws just yet. Waiting for my piston/valve to come back from Airgun Smith so I can put the gun back together. 

[quickster47 †]

Here is some additional front and rear sight adjustment information that might prove helpful.

Adjusting the Rear Sight
If you want the pellet to go:

Up   Raise the sight
Down   Lower the sight
Right   Move to the right
Left   Move to the left

Adjusting the Front Sight
If you want the pellet to go:

Up   Lower the sight
Down   Raise the sight
Right   Move to the left
Left   Move to the right

Carl

[breakfastchef]

Good list, Carl. I have adopted the FORS method to remember sight adjustments.

Forward = Opposite
Rear = Same

Here is some additional front and rear sight adjustment information that might prove helpful.

Adjusting the Rear Sight
If you want the pellet to go:

Up   Raise the sight
Down   Lower the sight
Right   Move to the right
Left   Move to the left

Adjusting the Front Sight
If you want the pellet to go:

Up   Lower the sight
Down   Raise the sight
Right   Move to the left
Left   Move to the right

Carl

[quickster47 †]

Larry, I'm adding your FORS acronym to my sight adjustment text file.

Thanks for sharing that one.

Carl

[cvarcher]

What about the 2 tiny set screws that are suppose to tighten the fit into the dovetail--my allen key doesnt fit them!!! Anyone know what size the set screws are?? Anyoe have this problem??