where can i get a 14 inch crosman barrel for my 2240

[howie1968]

where can i get a 14 inch crosman barrel for my 2240, i figure this is the fastest and simplest way to increase velocity, any part numbers will be appreciated. Also will this barrel mount up to my 2240 with no problem? i already have the steel breech kit installed

[breakfastchef]

Try Mac1 (http://www.mac1airgunshop.com/Default.asp); TKO (http://www.tko22.com/) & Bryan & Associates (http://www.airgunbna.com/) as a starting point.

[howie1968]

thanks bro i appreciate it

[Pumpmeister]

Howie!

Try Rick @ Precision Pellet  airgunshop@aol.com

Part # is 2289-001

Tell Rick Mario Romano sent you  if No response at B&A

[breakfastchef]

I never ordered anything from Rick, but always hear very positive comments about him.

Howie!

Try Rick @ Precision Pellet  airgunshop@aol.com

Part # is 2289-001

Tell Rick Mario Romano sent you  if No response at B&A

[Pumpmeister]

Hey Larry!


      Rick is A Good man who knows the Crosmans  others he works on. He resealed two of my 1100's an 2 of 622's I sent for repair and got  quite a few  13XX Parts
from him, always has good advice!  Rick works during day but you can  email him at:

airgunshop@aol.com

Mario

[Fronzdan]

You can also get this from Charlie Mellon, but you'll have to wait.

Also check with Geppeto here on the CAPOF.  He does beautiful barrel work and may be able to hook you up as well.

[1377x]

if its a .22 14" barrel you are looking for then you can try a 2250 barrel its 14.5" long and available from crosman less than $20
i dont have the part number buts its floating around here
again its the barrel for a 2250

[JEBert]

if its a .22 14" barrel you are looking for then you can try a 2250 barrel its 14.5" long and available from crosman less than $20
i dont have the part number buts its floating around here
again its the barrel for a 2250

From the 2250B EVP the part number is 2250-019 but I can't tell how long it is.
http://www.crosman.com/cs/manuals/crosman-rifles
Cheers,

[tinker]

Alan @ A&B airguns might have them in stock too.  Or Allen can cut and re-crown a longer barrel.
http://www.abairgun.com/
Rick @ Precision Pellet is a good place to get parts too!
Glen

[Pumpmeister]

Been there,Done that Cutting and Re-Crowning!   I did have a 14" Barrel that was on my AS2250XT. but My Use it on  either My Newly AcQuired 2240 w/ F/O Fr. Sight & WGRS-54 !

  Mario

[1377x]

From the 2250B EVP the part number is 2250-019 but I can't tell how long it is.
http://www.crosman.com/cs/manuals/crosman-rifles
Cheers,

its 14.5"
the 2250 didnt come with any other length barrel the 2260 has/had a 24" barrel and the 2240 a 7" barrel
the only gun i know of to be reintroduced with a different length barrel is the 2289g it came with a 14.5" barrel at first now it has a 12" barrel
the only difference between the 2289 14.5 and the 2250 14.5 is the dimple for the set screw of the 2250 barrel band
hth

[Pumpmeister]

FWIW the Dimple can be Hidden with Barrel Band or Shroud! Doesn't Bryan and associats Have a 8.375" Extension?

   Mario

[Gippeto]

Also check with Geppeto here on the CAPOF.  He does beautiful barrel work and may be able to hook you up as well.

Nice of you...Thanks!

Don't have any spare 2289 barrels on hand ATM.

Al