Front Sight Options

[blake.l]

I put my peep sight on and shot a couple pellets last night and she was shooting high. Peep sight is sitting as low as it can go.. Here is the rear sight I'm using.. http://www.pyramydair.com/s/a/Williams_Diopter_Sight/2003#sSpecront the front pin sight is to short... Do they make the front pin sights any taller than the stock one from the CCS. I made one from a little plastic screwdriver I found I've not had a chance yet to try it but what are some other front sight options? ones that will work with the muzzle breaks as I my be going to a TKO or some other.

[quickster47 †]

Yes they do make a taller front sight in the same configuration.  I'll look for the part number but in the meantime some one else may pop in here with it.

Carl

[chongman]

Sight Post part number 2300-028

[quickster47 †]

Sight Post part number 2300-028

I did have that part number but wasn't sure if it was the short or tall sight post part number.

Carl

[quickster47 †]

Sight Post part number 2300-028

That is the correct part number and in the picture below it is the longer sight.

Carl

[blake.l]

Thanks for the part number and info guys...

[droid]

 

Carl, is there any parts that you don't have in your warehouse ?