Extreme baffled Shroud

[cohiba]

Good afternoon Guys,

i have a 2250xe that i converted to PCP using DC tube. I installed a crown and ported Mtn air 14.5 inch .22 cal barrel. I had 2 BNM shrouds one is 18 inch (used before when it was C02) the other being a 22 inch shroud. After shooting with the 18 inch shroud that had 8 baffles i wanted to make it quieter, so i installed the 22 inch shroud and add baffles for a total of 15!!!!! It seems to shoot good, and is obviously very quiet.

How do i make sure the baffles are lined up with the barrel? any ideas? The goods and bads to what i have done?

[breakfastchef]

The same principles should apply as when you had the gun setup with the 18" shroud. Measure the distance from the end of the shroud up to the base of the last baffle. Install the barrel collar up to that mark on your barrel.