Tips for zeroing stock sights

[azmark]

Since the Crosman stock sights have no click adjustments or reference marks, are there any methods that will save time when you zero the stock sights or is just trial and error?

[Brent]

If you look real close, there actually are some hash lines for windage, and on elevation just loosen the screw a tad to where you can slide it up or down with slight resistance, a little at a time.

Word of caution, don't over tighten the screw, it can strip out the plastic fairly easily.

[breakfastchef]

Sighting is fiddly and all trial and error. Chances are you will run out of elevation adjustment for closer ranges. One tip is to lengthen the slot in the rear sight blade to increase the adjustment range.