ordering on monday Just checking #

[K.O.]

I have a Birthday coming up. I am a touch past 50.

Mommy sent cash

I get to blow a little on my toys

So I plan on ordering

steel breech (kit?)        2240sbpk
14.5 Barrel                  2250-019
bugout pump grip        1389-025




I read some advise which I had wondered about already (stuff good to have on hand),

"
looks like you got it covered
the 760 barrel band might be a different part number now

get extra pump cups if you are not using a flat top set up
extra bolt o-rings
get an extra trigger spring you can use that in your valve as a lighter valve spring
discovery hammer spring if you plan on pumping more than 10x
fiber optic front sight if not using anything else on the end of the barrel
maybe some extra outside valve o-rings
and most importantly extra 4-48 breech screws cant have to many of them i keep 5 just in case but if you make sure your wrench is completely seated before removing the screw you shouldn't have any problems   "

so I will be getting some of those

thought I would just check if # are current.

Also is there a current inexpensive Crosman globe type front sight that would or I could make fit?  ( I will use a drilled out 853  barrel weight as a last resort)

Something like this I will probably use the Daisy  rear 5899 peep with it.

http://www.ebay.com/itm/VINTAGE-CROSMAN-FRONT-GLOBE-SIGHT-/271273550826?nma=true&si=7bjGAT2VJfp5gOzRvjpUyzUtsqI%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557

Ideas?

Thanks...

[targettgii]

The breech and pump arm numbers are definitly correct and I believe the barrel one is also but not sure HTH.

[K.O.]

Thanks,

with #s changing and going obsolete I thought it might be good to check here...

[mudduck48]

While you are ordering parts, don't forget to order some transfer port seals. 130-036. Every time you you do a build, you need this seal.

[K.O.]

While you are ordering parts, don't forget to order some transfer port seals. 130-036. Every time you you do a build, you need this seal.

that will be in my next order when I get a breech and barrel for the pc 77,


Until then I have a freezer with an ice maker  that I have no plans of ever hooking up...

[Tater]

Don't forget to order a couple of extra ball bearings for the safety.

[K.O.]

Thanks to tater my order included a couple safety balls,

Now I just have to wait for the truck.