What do you wish someone would manufacture?

[beerhippy]

Chime in with your ideas.  Who knows, maybe someone will take note.
Just  a couple ideas to start;

A good set of iron sights for the Crosman steel breech.  An adjustable rear and a tall enough push on front for stock barrels and a glue on for shrouded barrels.  Maybe out of delrin.  Should be easy peasy with cnc. $35 a set

Boyds should come out with grips and forearms for the 13xx and 22xx. $35 for grips, $65 a set.

[Brutuz]

Wish Crosman would make a pistol like this one http://www.china-airrifle.com/products_detail/&productId=0855eef7-4a94-44d7-8f32-993c92ede535.html but with adjustable target grip

[Noah]

Wish Crosman would make a pistol like this one http://www.china-airrifle.com/products_detail/&productId=0855eef7-4a94-44d7-8f32-993c92ede535.html but with adjustable target grip

Nice! Where can we get one? Price(s)?

[crossliner]

Nice! Where can we get one? Price(s)?

http://mrodair.com/new_hot_items_check_it_out_mrodair_s400

[jSan22]

Barrel mounted rails that slip over the barrel and secure with a grub screw. A metal insert that fills the gap between the barrel and tube.

[beerhippy]

Barrel mounted rails that slip over the barrel and secure with a grub screw. A metal insert that fills the gap between the barrel and tube.

Alchemy has those.  They used to be stock parts on the older 13xx guns.
http://www.ebay.com/itm/NEW-OLD-SCHOOL-Crosman-BLACK-BARREL-TUBE-SPACER-TRIM-1322-1377-PC77-Air-Guns-/291053462592?pt=LH_DefaultDomain_0&hash=item43c4236440

[Noah]

http://mrodair.com/new_hot_items_check_it_out_mrodair_s400

I just received this email message from Shaoxing Air Gun Factory:

Dear Noah

Thank you for your email. Our agent will get CP1-M order at the end of May. then you can buy from them. I am sorry, I don't know about the retail price.

Thank you and have a nice day!

Best regards!

Julie

Shaoxing Snowpeak Air Gun Factory
1280，Chengnan Road,Shaoxing,312000
Zhejiang,China
Tel:0086-575-88907507  Fax:0086-575-88318221
http://www.china-airrifle.com

[rws_53]

http://mrodair.com/new_hot_items_check_it_out_mrodair_s400

I've been waiting for these to become available...but may wait for the PCP version.

Here's some technical info:

CP-1 available in .177, .22 and .25
http://www.china-airrifle.com/products_detail/&productId=9e5d634d-c2b0-4ca3-a01c-5d3702a28f60.html

CP-1M available in .177 and .22
http://www.china-airrifle.com/products_detail/&productId=0855eef7-4a94-44d7-8f32-993c92ede535.html




.

[Korak]

For the 2240. A 7.5" or 10" barrel with a built in, muted "muzzle brake" or noise reducing shroud..

[DavidS]

A larger pump volume 13xx (likely by a larger ID tube).

Bring back the Crosman 140.

Make a carbine with the stroke length of the Crosman 140 and a pump tube ID of 0.75 inches.

[RC1947]

I'd like RWS Diana manufacture a gun in .20 cal. so that they would make .20 pellets.  The pellet selection for .20 is anemic. RC

[Rualert]

      Hey guys, been a while, but here's my 2cents: How about a rear cocking bolt for the 22xx, and 13xx series guns especially for those of us that run heavy hammer springs. Something like the Challenger T handle bolt. I actually sheared off a SS bolt handle on a current project due to the heavy hammer spring, and the amount of leverage needed to cock the gun. (PCP based) So when I received a few Challenger 2009's for the 4-H club and saw how nice they handle for lefties, or righties I just thought it would be great if we could have a bolt like that for our other guns.

Casey

[ejackyou]

I wish someone would develop a steam driven gun!

[Buster]

lol, there is... its fitted to aircraft carriers and shoots planes into the air !     

[beerhippy]

A larger pump volume 13xx (likely by a larger ID tube).

Bring back the Crosman 140.

Make a carbine with the stroke length of the Crosman 140 and a pump tube ID of 0.75 inches.

The Chinese could do that.  I like the idea of an all metal and wood super pumper along the the lines of the QB rifles.