• Welcome to Crosman Air Pistol Owners Forum.

What do you wish someone would manufacture?

Started by beerhippy, April 02, 2015, 07:22:44 PM

0 Members and 2 Guests are viewing this topic.

beerhippy

Chime in with your ideas.  Who knows, maybe someone will take note.
Just  a couple ideas to start;

A good set of iron sights for the Crosman steel breech.  An adjustable rear and a tall enough push on front for stock barrels and a glue on for shrouded barrels.  Maybe out of delrin.  Should be easy peasy with cnc. $35 a set

Boyds should come out with grips and forearms for the 13xx and 22xx. $35 for grips, $65 a set.
Man, that was close!

Brutuz

My Crosman pistols / My non-crosman collection /
I am also active on the UK Chinese Airgun Forum & sometimes on the GTA as well

Noah

"Money is like fertilizer: When it's hoarded, it stinks. When spread around, cool stuff grows." John Densmore, drummer of The Doors

Crosman 1377, 1322, 1325, 1750, 2250 and 2540, Benjamin Steroid 392, IB QB78D, Avanti/Daisy 853, Slavia 634.


jSan22

Barrel mounted rails that slip over the barrel and secure with a grub screw. A metal insert that fills the gap between the barrel and tube.

beerhippy

#5
Quote from: jSan22 on April 03, 2015, 03:37:07 AM
Barrel mounted rails that slip over the barrel and secure with a grub screw. A metal insert that fills the gap between the barrel and tube.

Alchemy has those.  They used to be stock parts on the older 13xx guns.
http://www.ebay.com/itm/NEW-OLD-SCHOOL-Crosman-BLACK-BARREL-TUBE-SPACER-TRIM-1322-1377-PC77-Air-Guns-/291053462592?pt=LH_DefaultDomain_0&hash=item43c4236440
Man, that was close!

Noah

Quote from: crossliner on April 03, 2015, 02:11:43 AM


http://mrodair.com/new_hot_items_check_it_out_mrodair_s400

I just received this email message from Shaoxing Air Gun Factory:

Dear Noah

Thank you for your email. Our agent will get CP1-M order at the end of May. then you can buy from them. I am sorry, I don't know about the retail price.

Thank you and have a nice day!

Best regards!

Julie

Shaoxing Snowpeak Air Gun Factory
1280,Chengnan Road,Shaoxing,312000
Zhejiang,China
Tel:0086-575-88907507  Fax:0086-575-88318221
http://www.china-airrifle.com
"Money is like fertilizer: When it's hoarded, it stinks. When spread around, cool stuff grows." John Densmore, drummer of The Doors

Crosman 1377, 1322, 1325, 1750, 2250 and 2540, Benjamin Steroid 392, IB QB78D, Avanti/Daisy 853, Slavia 634.

rws_53


Korak

#8
For the 2240. A 7.5" or 10" barrel with a built in, muted "muzzle brake" or noise reducing shroud..

DavidS

A larger pump volume 13xx (likely by a larger ID tube).

Bring back the Crosman 140.

Make a carbine with the stroke length of the Crosman 140 and a pump tube ID of 0.75 inches.

The ones I will grab if I need to go in a hurry (ie tornado flies through town, or similar):
Crosman 101 (My Original).
Crosman 140 (Sears 126-19300).
Crosman 2289.
Daisy 953.
Crosman 1322.
Crosman 1389.

RC1947

I'd like RWS Diana manufacture a gun in .20 cal. so that they would make .20 pellets.  The pellet selection for .20 is anemic. RC
2240
1377

Rualert

      Hey guys, been a while, but here's my 2cents: How about a rear cocking bolt for the 22xx, and 13xx series guns especially for those of us that run heavy hammer springs. Something like the Challenger T handle bolt. I actually sheared off a SS bolt handle on a current project due to the heavy hammer spring, and the amount of leverage needed to cock the gun. (PCP based) So when I received a few Challenger 2009's for the 4-H club and saw how nice they handle for lefties, or righties I just thought it would be great if we could have a bolt like that for our other guns.

Casey

ejackyou

I wish someone would develop a steam driven gun!
Only Pistols! Springers, Pneumatics, C02, Vintage

Buster

lol, there is... its fitted to aircraft carriers and shoots planes into the air !      :-*
Shaun

QB 78 dl
    &
Shed loads of Crosman's

beerhippy

Quote from: DavidS on April 03, 2015, 03:53:14 PM
A larger pump volume 13xx (likely by a larger ID tube).

Bring back the Crosman 140.

Make a carbine with the stroke length of the Crosman 140 and a pump tube ID of 0.75 inches.

The Chinese could do that.  I like the idea of an all metal and wood super pumper along the the lines of the QB rifles.
Man, that was close!