The Ultimate Crosman CO2 pistol

[BillK]

Is there an O-ring slot milled into the breech end, inside of the barrel?   Different looking transfer port hole?
That looks like a Prod barrel. 

[The Zen Master]

You bet there is!

What is a "Prod"?

Thank you!

[The Zen Master]

On second thought, Alliance sent me a diagram of a Marauder pistol and the diagram is an exact match for the barrel I have.

[The Zen Master]

Maybe it's an omen...

I put the Marauder (1701) trigger on it along with the plastic grips from my 1722 Classic and shimmed the LPA sight in - it feels nice - who knows, maybe I'll shoot a few puny 17's through it tomorrow just for the heck of it.

.22's kill squirrels way better.

[crossliner]

I thought a 17xx (1720T/Pistol Marauder/1701P) series barrel would not fit a 22xx/13xx without modification?

[The Zen Master]

I'm no even thinkin of that! Crosman has the correct barrel on the way - the Marauder barrel is a conversation piece now!

[crossliner]

Lol! Not a 22xx but a 13xx with a Don Cothran breech and some mods here and there. I finished this one just this week. Still waiting for my Don Cothran trigger



Also waiting for my adapter from Poland, so I could mount my "pickle"




https://donnyfl.com/

[Noah]

WOW - nice rigs, Crossliner!

[crossliner]

Thank you, sir!

[The Zen Master]

OK, got an email from Crosman my barrel was shipped - I wonder what barrel I will get this time? 

I took the 1701 trigger apart last night and cleaned it - it was a bit gooey feeling - and yah there was some goo in there, and while I realize it is not the Geissele trigger I have on my SPR, it still has a strange feel...

If I cock the pistol and take up the first stage it feels good-enough, but, if then, I release the trigger and re-take-up the first stage, it does not feel the same - almost slightly sticky - and all the surfaces look good under a 7X MaginVisor, so I'm stumped?

Its better than the factory trigger but not as nice as the 1701 trigger I put on my 1322 American Classic.

[The Zen Master]

First 5-shots at 5-yards 2-hands resting on a door frame - probably why all the left and right but elevation spot on never even adjusted a screw. never had that happen before.

[Noah]

That'll work - keep on truckin'!

[crossliner]

Nice group 

Now you may change your mind and respect the .177 

[crossliner]

3 pumps, 4 shots at 15 yards using .4.52 JSB 8 grain pellets 



Was planning to change the barrel to a LW but now I am liking this one a lot 

The 2 moa size dot on my Vortex Sparc helped a lot with the aiming.

Oh, I polished the leade and the port and cleaned the bore with Hoppes, Mother's Polish then Ballistoled it.

I have had always gotten very good Crosman barrels in .177, just saying 

We have about the same barrel, btw.

[The Zen Master]

Brand-new 10.1" Crosman .22 barrel & bolt delivered!

Tonight I will get Zen and do the swap!