• Welcome to Crosman Air Pistol Owners Forum.

Crosman 2240 grip frame screw question.

Started by Hoss, October 03, 2020, 03:57:25 PM

0 Members and 1 Guest are viewing this topic.

Hoss

I went to put the grip frame back on my 2240 and noticed that one screw is longer than the other one, does anyone know where the long screw goes?
I installed a hammer spring power adjuster, if I put the long screw on the back end it locks up the adjuster knob. If I put it in the front it sticks inside the tube quite a bit. I think the short screw was in the rear when I took it apart, but not sure, any help would be appreciated.

Thanks!

BillK

Quote from: Hoss on October 03, 2020, 03:57:25 PM
I think the short screw was in the rear when I took it apart, but not sure, any help would be appreciated.

Thanks!

Yup, your right.  Long front - short back. :)
West Michigan
Crosman Nitro Venom .22
Crosman 760 - 782 - 1077
Sheridan S S - H - E9
Benjamin NP pistol - Disco - Prod
MIC B1 .177
2300S - 2300T - 2400kt
1740 - 2240 - 2250 - 1760 - 2260 - 1701P
1322 - 1377
MK I & II

Hoss

Quote from: BillK on October 03, 2020, 04:15:54 PM
Yup, your right.  Long front - short back. :)
Thinks alot, not only do I have a short screw, I also have a short memory now days.