how to remove the pins in the 1322 pump arm ??

[kada82]

does anyone know off a strip down guide for the medalist 1322.

ive stripped most of it down but dont know how to remove the pins from the pump handle to get the valve out they are not like normal pins they look like they are coiled around cheers craig..

[1377x]

are you talking about the pivot pin??
if so a hammer and a punch is what i use.sometimes a flattened nail
my 1389 has the same pin.it takes a little more force
i may or may not be doing it the correct way but it works for me.

[NorthStaR]

Yup do it as 1377X says. 

I rest the gun on a block of cork to take the impact off the body as I knock the pin out.
You may want to replace that roll pin with a solid one. It'll make the world of difference IMHO. 

[JEBert]

3/16" roll pin punch.  Regular 3/16" pin punch will work too.
Cheers,