• Welcome to Crosman Air Pistol Owners Forum.

what tool do i need for this?

Started by millipede, August 05, 2012, 08:09:12 PM

0 Members and 1 Guest are viewing this topic.

millipede



i want to move the seat of the valve stem closer to the transfer port for better direct flow into the barrel but i don't know what is needed to make the conical shape. basically i want to remove as much material as i can but not get rid of the edge that the stem seals on

eric

have you angled the port --- to do what you want to do a lathe is probably your best bet or find someone who can do it for you ar make a custom valve.
TOO many freaks and NOT enough circuses

breakfastchef

Quote from: eric on August 05, 2012, 09:30:36 PM
have you angled the port --- to do what you want to do a lathe is probably your best bet or find someone who can do it for you ar make a custom valve.

x2. If you muck up the valve seat, the valve is useless.
Larry