• Welcome to Crosman Air Pistol Owners Forum.

Rescued 1377 lives again

Started by 7624452, August 09, 2012, 10:25:48 AM

0 Members and 1 Guest are viewing this topic.

7624452

Last month I was going through an old trunk and found a 1377(Phase II) that had been there for about 15 years.  A friend of mine was going to toss it in the trash and I rescued it.  He had used it extensively when he was young and abandoned it for firearms and co2 guns.  It had been used mostly with steel bb's and the barrel was pretty slick.  Overall it was in pretty decent shape for the heavy use it had been through.  I liberally applied pellgun oil, fired it a few times and it seemed to work fine.  I then started looking around on the internet and found a high availability of parts and mod information, so I got hooked immediately.  I purchased a 1322 and was really surprised at the poor quality.  Instead of the nice solid pump arm pin with c-clip that the 1377 had, the 1322 had a poorly fitted roll pin and the pump handle arm is so sloppy that I am afraid I might bend it while pumping, and it squeaks like a wounded mouse.  So, I obtained a 14.5 inch barrel, shoulder stock and barrel band and started converting the 1322 to a carbine.  I also obtained two pump handles (I think from a 760) and changed out the originals.  The original pump handles are much too uncomfortable for me to use.  I used the stock .22 barrel from the 1322 and a plastic breech to convert the 1377 to .22.  I also slicked up the pump tube, replaced the seals and put some different parts on the valve.  I do not feel the need for a steel breech or optical sights.  I probably will be mostly shooting it inside the house with three pumps.  I'll post the results of the 1322 mod when I finish with it.
Stranded in California.

cmj21973

All 1377's (new and old) have the rolled pivot pin originally.

Post a picture of the solid pin.

Crosshairs

#2
Quote from: cmj21973 on August 09, 2012, 10:47:36 AM
All 1377's (new and old) have the rolled pivot pin originally.

Post a picture of the solid pin.
X1  No safety  ???.
                       Mike
Treat people the way you want to be treated, Life will be so much better !!!

1377x

Quote from: cmj21973 on August 09, 2012, 10:47:36 AM
All 1377's (new and old) have the rolled pivot pin originally.

Post a picture of the solid pin.
my old phase 1 and 2 1377's came with a solid pin with c-clip it s only one the early phases
my phase 2 was in original condition when i got it im  the second owner my dad being the first. he didnt do any modding to the gun

7624452
your gun looks great is the blueing still dark or is it the pic
imo the early phase 13xx guns were the best brass valve and solid pin why did they ever change that
closed mouths dont get fed

Fronzdan

Another one heading down the path of addiction.

+1 on the brass valves in the early phase 13xx's. Wish you could still get them.

JEBert

HI 7624452 and WELCOME to the best forum on the net!
Cheers,
Jerry
NRA Life Member
USAF Veteran 1973-1977 (43151E) Sgt (E-4)


Crosshairs

#6
Quote from: 1377x on August 09, 2012, 04:36:59 PM
my old phase 1 and 2 1377's came with a solid pin with c-clip it s only one the early phases
my phase 2 was in original condition when i got it im  the second owner my dad being the first. he didnt do any modding to the gun

7624452
your gun looks great is the blueing still dark or is it the pic
imo the early phase 13xx guns were the best brass valve and solid pin why did they ever change that
Oh yeah thats right Duh i have a few like that.I was just looking at them lol.
                                            Mike
Treat people the way you want to be treated, Life will be so much better !!!

Crosshairs

Treat people the way you want to be treated, Life will be so much better !!!

1377x

the polish jobs you do to your guns is amazing.i dont know if its patience of what ???
i cant get my guns to look like that
closed mouths dont get fed

7624452

Quote from: cmj21973 on August 09, 2012, 10:47:36 AM
All 1377's (new and old) have the rolled pivot pin originally.

Post a picture of the solid pin.

Where did you get that information ?
Stranded in California.

7624452

Stranded in California.

7624452

Quote from: Crosshairs on August 09, 2012, 12:18:55 PM
X1  No safety  ???.
                       Mike

I do not feel the need for a safety.
Stranded in California.

7624452

Quote from: 1377x on August 09, 2012, 04:36:59 PM
my old phase 1 and 2 1377's came with a solid pin with c-clip it s only one the early phases
my phase 2 was in original condition when i got it im  the second owner my dad being the first. he didnt do any modding to the gun

7624452
your gun looks great is the blueing still dark or is it the pic
imo the early phase 13xx guns were the best brass valve and solid pin why did they ever change that
Yes, the pistol has a solid pin with a c clip and very little play in the pump handle.  the blueing is pretty good, the barrel is a new .22.  I kept the brass valve and replaced some internal parts.
Stranded in California.

1377x

Quote from: 7624452 on August 09, 2012, 08:59:19 PM
Where did you get that information ?
from the phase 2 1377 bought new back in 1984,when they still came in a box and the phase 1 1377 .they both had the same solid pin with c-clip
if you look at crosshairs shiny phase 2 it has the same solid pin
closed mouths dont get fed

woody67

Quote from: 7624452 on August 09, 2012, 09:17:55 PM
I do not feel the need for a safety.

I always need a safety, because while im waiting to take a shot my trigger finger always has ADD and twitches and bounces on the trigger and i always pull on it while im walking around or waiting for the shot to line up. Im stupid, i know. I cant tell you how many times ive fired shots straight into the ground because of it. Always surprises me too.......but at Least i am insanely careful about where i have the muzzle pointed.