Trigger

[1377x]

theres rubber seals on that trigger?
good job they blend right in!
like the little screw you added to the top of the trigger! thats to shorten the pull,right?

[JEBert]

Ed, I think the seals he is talking about is the little rubber bumper on the top of the trigger to take the slack out of it.   I may try that.
Cheers,

[1377x]

Ed, I think the seals he is talking about is the little rubber bumper on the top of the trigger to take the slack out of it.   I may try that.
Cheers,

i thought that was a screw
i may have to give that a try ,also

[crossliner]

Ed, I think the seals he is talking about is the little rubber bumper on the top of the trigger to take the slack out of it.   I may try that.
Cheers,

Mr. Jebert is right. It should be rubber and not plastic or any hard material..Be careful though because the trigger becomes a single stage w/ no play whatsoever..Too thick a rubber disables cocking so you may need to do a bit of sanding...

[1377x]

thats pretty much how i have my 1701p trigger group set up.
thanks for the tip to thick part and the other things o-rings are good for