Crosman 130

[UnRest]

Well i got this pistol in a trade and have had lots of fun with it so far. actually im impressed at the accuracy that this pistol is capable of. now i want to get low powered scope and really see what it can do so heres what i think will work.
http://www.pyramydair.com/s/a/Leapers_5th_Gen_4x32_AO_Bug_Buster_Scope_Illuminated_Mil_Dot_Reticle_1_4_MOA_1_Tube/502
dont think this will work can someone suggest a good 20yard sight for under $75?

with this mount
http://www.pyramydair.com/s/a/Air_Venturi_Scope_Base_Weaver_Picatinny_Rail_Fits_IZH_46M/3077
i really hope this mount will work if not anyone know of a mount that will?

heres some pics for those who hasn't seen them


cleaned up and resealed

made my own grips



then decided to try 4 different pellets here the results



so the Crow Mags was the best and follow close by by the H&N HP

[breakfastchef]

I don't use scopes on pistols. You can't go wrong with a Leapers, but the short eye relief may be a problem for you unless you plan to shoot using the 'taco hold'.

I have a Barska Contour 2x20 scope with 11" eye relief I have used on a few pistols. It is not too bad and cost around $35. Though this particular scope does not have an AO, I found you can unscrew the front lens a wee bit and it virtually eliminates the parallax problem.

[UnRest]

thx breakfastchef ill check it out.  also i have been trying to figure out if the front sight of the 1322 will fit my 130. if any one knows plz let me know cause i have seen some really nice after market ones .

[1377x]

nice shooter and nice shooting
eric has a different kind of scope mount on his 140/1400 one of his vintage guns.i think thats the mount that will fit your gun.
they are no longer sold but turn up on the yellow from time to time

[Cross Pistol Packer]

Nice old pistol

[KevinP]

Very nice ...   

[Crosshairs]

Sweet 130 and i like the grips. I don't have to tell you how much i like the classic crosman guns. Just look at your pic of the gun apart all metal no plastic at all. Congrats on your new shooter you made a good score there.  IMO i would forget the scope on that gun but thats just me.
                                                Mike 

[chongman]

Beautiful vintage pistol.  The grips are outstanding, very nice craftsmanship 

[RC1947]

I have gotten excellent results using NCStar scopes on pistols; they're inexpensive and have a much longer eye relief than the Leapers, which are excellent on rifles.  Nice old gun, and fine shooting! RC

[UnRest]

thx guys for the replies. this was 1st pistol and 1st time cleaning /reseal. i wish i had crony cause it seems that this is shooting better than factory specs .


http://www.walmart.com/ip/Bushnell-Trophy-1-x-28-6-M.O.A.-Red-Dot-Sight-Matte-Finish/5871156

i think this mite be what i want anyone have this model??

[Crosshairs]

thx guys for the replies. this was 1st pistol and 1st time cleaning /reseal. i wish i had crony cause it seems that this is shooting better than factory specs .


http://www.walmart.com/ip/Bushnell-Trophy-1-x-28-6-M.O.A.-Red-Dot-Sight-Matte-Finish/5871156

i think this mite be what i want anyone have this model??

Cool RedDot i have been looking at that one it looks pretty nice.
                                                   Mike
http://www.amazon.com/Bushnell-Trophy-1x28-Red-Riflescope/product-reviews/B0000A0AGC/ref=dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
                                 

[UnRest]

thx Crosshairs !! i think i will pick that up next week. now only if i can find a proper mount. i think ill get the Air Venturi mount  and see if it works if not it should be close enough i can mod it. I dont think i have much of a choice either .

[Crosshairs]

thx Crosshairs !! i think i will pick that up next week. now only if i can find a proper mount. i think ill get the Air Venturi mount  and see if it works if not it should be close enough i can mode it. I dont think i have much of a choice either .

These are the mounts i got a few weeks ago and they work great also keep the RedDot low.
                                                 Mike
http://www.amazon.com/UTG-Dovetail-To-Picatinny-Profile-Adaptor-Black/dp/B007BNHFLQ/ref=sr_1_21?ie=UTF8&qid=1346439095&sr=8-21&keywords=weaver+mounts+adaptor

[UnRest]

those mounts will not work on a 130 theres no rail has to be barrel mounted far as i can see.

im also going to order these and looks like they carry few other makes as well
http://www.airgundepot.com/b272-mounts.html

[BDS]

Yup, no rail and old-skool breech to barrel hook up.

Have you looked at the Crosman Intermounts? Pyramyd Air and maybe even Wally world.com have e'm. If your optic is mostly ligthweight, they should work fine (assumes a nominal 7/16" OD barrel dim)