• Welcome to Crosman Air Pistol Owners Forum.

P-rod grip frame / trigger dimensions

Started by styks, September 06, 2012, 01:08:04 PM

0 Members and 2 Guests are viewing this topic.

styks

Just a quicky guys.
Are the dimensions of the 2240 grip frame and the p-rod grip frame identical?
I would like to make some grips for when my p-rod frame arrives using my 2240 frame as a pattern.

Fronzdan

Quote from: styks on September 06, 2012, 01:08:04 PM
Just a quicky guys.
Are the dimensions of the 2240 grip frame and the p-rod grip frame identical?
I would like to make some grips for when my p-rod frame arrives using my 2240 frame as a pattern.

Overall identical.  But on the "inside", you need to shave off a little more wood off the surface to make room for the sear spring guide/ trigger tension adjuster.  Not a big deal.

0351_Vet

Quote from: Fronzdan on September 06, 2012, 02:31:55 PM
Overall identical.  But on the "inside", you need to shave off a little more wood off the surface to make room for the sear spring guide/ trigger tension adjuster.  Not a big deal.

How much has to be removed on the inside? Thanks.
Marauder  .25 / CP 4-16x56mm AO Mil-Dot & Marauder P-Rod
Disco .22 / Leapers 3-12x44mm AO  Mil-Dot / Disco Sleeper Carbine
Katana .22 / CP 4-16x56mm AO Mil-Dot
2260 / CCS 2400KT / 2300KT / 1701 / 1377 / 1322 / EB22 / Benji 132 / Benji 422


<'((((><      ΜΟΛΩΝ ΛΑΒΕ


styks

Quote from: Fronzdan on September 06, 2012, 02:31:55 PM
Overall identical.  But on the "inside", you need to shave off a little more wood off the surface to make room for the sear spring guide/ trigger tension adjuster.  Not a big deal.

Ok thank you Fronzdan I can now get on with it, I'll do the main work and wait until the frame arrives to complete the in-letting for spring guide / trigger tension .