STOP ME BEFORE I BUY AGAIN!!

KevinP · September 24, 2012, 08:01:53 PM

Quote from: Brutuz on September 24, 2012, 07:19:06 PM
Go with the flow mudduck48, don't resist temptation

let the force be with you !!!

sandpiper · September 25, 2012, 03:23:29 AM

Quote from: crossliner on September 24, 2012, 05:04:15 PM
Personally I would never buy a bb-spitting gun no matter how cool-looking or cheap they are. No offense meant gents. Best regards.

I agree but with the exception of the Tanfoglio Witness.

Crosshairs · September 25, 2012, 11:23:06 AM

Quote from: crossliner on September 24, 2012, 05:04:15 PM
Personally I would never buy a bb-spitting gun no matter how cool-looking or cheap they are. No offense meant gents. Best regards.

You dont know what fun your missing crossliner, remember the key to our hobby is to have fun.
Mike

BDS · September 25, 2012, 02:54:16 PM

Quote from: sandpiper on September 25, 2012, 03:23:29 AM
I agree but with the exception of the Tanfoglio Witness.

+1 to that Sandpiper, and add the Colt

crossliner · September 25, 2012, 04:44:10 PM

You may be right gents but for my purpose w/c is primarily rat hunting I would feel "uncomfy" w/ a bb gun..I want the projectile to hit where I am aiming at. Best regards.

mudduck48 · October 16, 2012, 08:44:51 PM

Parts is parts Vern. 4-48 ss pan head for the breech screw.

BDS · October 16, 2012, 09:14:19 PM

O' duck of the mud...

Those are button-heads, the 4-48 in the stock breech is an ASME B18.3 low-head socket, are those button heads the same height (head thickness)?

mudduck48 · October 16, 2012, 09:48:52 PM

No. Fronzdan said, in the post "breech size screw", to get these screws and trim a little of the side of the head and flatten the head just a touch and they will work. These are sloted head screws. Just got them to day from Industrial Bolt Co. here in SoCal. Haven't had a chance to try them yet.

0351_Vet · October 16, 2012, 10:40:36 PM

Quote from: BDS on October 16, 2012, 09:14:19 PM
O' duck of the mud...

1377x · October 17, 2012, 10:38:45 AM

with them being thicker they might help with the pellet loading problem
if the head sticks out too far shave it down till its flush or slightly lower than the hole in the breech no need for candle wax right?

cmj21973 · October 17, 2012, 11:33:28 AM

If you find out they need some work done on them, send a few my way.

Fronzdan · October 17, 2012, 01:13:20 PM

Yeah just chuck em up in your power drill and file the head flat and reduce the diameter some. Also be sure to use the right size slotted screwdriver.

mudduck48 · October 17, 2012, 05:28:30 PM

PARTS! I received my first parts buy from Crosman. Parts to fix 4 of my guns.

BDS · October 17, 2012, 07:04:35 PM

Nice....it's just like Xmas ain't it?

mudduck48 · October 17, 2012, 08:39:41 PM

Yes it is. I will be even more so when my steel breech and my LPA MIM sight get here. YES!