WHAT's IN YOUR FEDEX/UPS TRUCK?

[crossliner]

16mm OD x 22" long Lothar Walther barrel (.22 cal)
Hatsan Air Stripper
2 extended bulk fill adapters for 2260/Disco from Joe @ HPA Sports
P-rod grip frame
24" & 30" x 7/8" OD CF tubes (1 each)


Todd

How are you liking the Hatsan air stripper Mr. HH? It looks cool and the price is not bad at all..Regards.



http://www.pyramydair.com/search-results-ext?Ntt=air+stripper&sid=1375A617A415&N=0&Ntk=primary&q=air+stripper&cx=002970863286801882398:jlcminxfwdw&cof=FORID:11;NB:1&saSearch&jsessionid=DBA63BB62211737A3ADEC908E0B5E2A9.app02

[YSYEO]

Found this at someone's curb during my morning constitutional 

It appears to be made of cedar.

[mudduck48]

Nice find. It looks like a baseball bat holder.

[crossliner]

Recently ordered one..I like this MB's look..It's a product by Kineti Tech and the price is good albeit I dunno if has any effect but for the cool factor it's a go for me ..Gonna be almost 2 months before I get it 



http://www.kineti-tech.com/all-black-ported-muzzle-brake-fake-muzzle brake-muzzle brake-style-4-1-2-long/

[youtube]https://www.youtube.com/watch?v=lJAIvmoQTNw#]https://www.youtube.com/watch?v=lJAIvmoQTNw#[/url]

Good news my box from Kansas containing plenty of ag goodies is set to arrive Manila on the 27th of this month..Gonna take a week or two to get to my city 

Regards.

[YSYEO]

Nice find. It looks like a baseball bat holder.

You know, I didn't think of that, but it does look that way now that you mention it.  Makes a good airgun stand, though.   I will add some felt and maybe enlarge the slots where needed.

[Cwlongshot]

I just received tracking numbers for my Talon Magnum!

Only problem is it was shipped UPS.... Here we go again!

Ill hope for the best and prepare for the problems and delays.   

CW

[bgmcgee]

I just received tracking numbers for my Talon Magnum!

Only problem is it was shipped UPS.... Here we go again!

Ill hope for the best and prepare for the problems and delays.   

CW

Maybe this will be your lucky day.

[JEBert]

According to UPS, my Chongman O-ring bolt will be here tomorrow!
Thanks again, Michael!

[brz-ryder †]

CW hope you have better luck than i did Monday my mini mill came in i waited all day to find out he came early in the morning and dropped it in front of the garage instead of on the porch it was laying on it`s side glad it didn`t rain if my son`s GF didn`t see it when she came home she could have run into it Damn Fedex

Jim

[mudduck48]

i like this one.
[youtube]https://www.youtube.com/watch?v=PKUDTPbDhnA#]https://www.youtube.com/watch?v=PKUDTPbDhnA#[/url]

[Trophyhunter49]

   I had ordered a few 14.5" .22 barrels from Crosman in May,got one or them perrty quick and the other two were on back order!   Well they came in on Friday afternoon late and they werew 12.0" barrels!! I call them Monday to get my order fixed!  Well the guy at Crosman toll me that I had ordered 12.0" barrels ,I told him No sir, I have already gotten one of the 3 barrels and it was 14.5" barrel! I gave him the part # (2289-001) and he said that had been changed to a 12.0" barrel!! Well I said I ordered 14.5" and thats what I paid for and thats what I wanted.  I was real nice about it. This guy was a TOTAL A$$ hole.  I have never had anyone at Crosman act like that before I was  I got an email saying mt barrels were on the way and I had to pay for return shipping on the 12.0" barrels!! I don't think so, I'm not the that screwed up!!!

[Cwlongshot]

Well UPS tracking has found the barrel and its still in Texas and scheduled to be here Friday. I also see its coming signature required...
Hope the brown bugger comes when he usually does... 

CW

[HappyHunter]

How are you liking the Hatsan air stripper Mr. HH? It looks cool and the price is not bad at all..Regards.

Well...to be quite honest Mr. Crossliner, I haven't had a chance to try it out yet! It's part of my current project, but I still have some machining to do to it in order for it to work for my application. I will give you a full report on how it works by...oh, say, Sept 1st at the latest...

I do know a few people who use them and it does have a dramatic effect on accuracy, just needs to be dialed in to the proper distance from muzzle to see the full benefits 

[Davio]

Well, it is not a gun... (got plenty of those) 

Today I received the little Northern Tool 6" chop saw with metal cutting blades.  It was about $70 or so.   It makes really quick work of sectioning the brass, aluminum, stainless and Delrin round, hex and square stock into various lengths.  I just used it on a piece of brass and it righteously gave me 4 pieces 2 7/8 from a 12" bar of 3/4. 

The clamp is solid, the miter angle is handy, and it even has a clamp insert for round stock.  This is so much better than using the parting tool on the lathe. It would not do in an industrial pipe shop, but it will last me for years.  It even came with an extra pair of quick change motor brushes! 

I think I just bought myself a few hours a week every week from now on. Good times 

[chongman]

My hacksaw and I are envious brother