WHAT's IN YOUR FEDEX/UPS TRUCK?

[droid]

i have an anthony storey and it works great.doesnt do much at 40fpe

We don't have LDCs over here in the UK, are they supposed to actually do anything ? (Apart from collect lead dust)

Mine didn't anyway and at a feeble 5.5ft

Gary

[droid]

Not much today, just a bag of extra long screws for the rear breech position for my RJ high riser.

Also got to go an collect some parts from the Post Office to pay customs charges on !!  (JG Airguns Mk 1 parts)

Gary

[Crosshairs]

I wish I had something to tell you all but nothing coming, well not for me anyway . I'm thinking about selling my M Rod to get a FX or Ed Gun.
Mike

[BDS]

Just a quick Hi-jack.........


Is this the longest running post on the CAPOF? 52 pages of posts and no sign of slowing down..... Got to hand it to BDS for starting one heck of a thread!!!

I stand accused....guilty sir! 

[droid]

I wish I had something to tell you all but nothing coming, well not for me anyway . I'm thinking about selling my M Rod to get a FX or Ed Gun.
Mike

You actually sell some Mike

Well I never,  I thought it was all one way traffic at your house   

[1377x]

10,020 the last i looked i was 9998
ok i have quite a bit coming in
something for my AA sponsor (airgun anonymous)
some don cothran parts
mentioned before daq breech possibly a daq valve
workinmanva .25 26" barreled upper-breech bolt,barrel band and barrel

I wish I had something to tell you all but nothing coming, well not for me anyway . I'm thinking about selling my M Rod to get a FX or Ed Gun.
Mike

thats not a bad idea!
hate to say it but i was going to do the same thing to get a condor

[1377x]

We don't have LDCs over here in the UK, are they supposed to actually do anything ? (Apart from collect lead dust)

Mine didn't anyway and at a feeble 5.5ft

Gary

you know thats just a sugar coated word for doofer

Not much today, just a bag of extra long screws for the rear breech position for my RJ high riser.

Also got to go an collect some parts from the Post Office to pay customs charges on !!  (JG Airguns Mk 1 parts)

Gary

what you bought some stuff from jg you know there are better places to get parts from

[droid]

The LDC I got was lust an empty tube.

Yes JG were the only place that I could find that had the mark 1 spares I wanted.

[BDS]

Gary... there are bunches of "doofers" available in the UK. Deben is one resource, Weihrauch makes a great one, many are 1/2" UNF threaded but... an adaptor could manage that on Crosman barrels.

These stateside LDCs are mostly lightweight Delrin/Alum products for the 7/16" Crosman barrel (slip fit). They do a fine job for the intended purpose, but there are folks who get "cranky" when they are less effective at higher pressures they were not intended for. Kinda like putting a Ford Fiesta muffler on a Corvette and then not liking the noise that comes out the pipe 

[droid]

Gary... there are bunches of "doofers" available in the UK. Deben is one resource, Weihrauch makes a great one, many are 1/2" UNF threaded but... an adaptor could manage that on Crosman barrels.

These stateside LDCs are mostly lightweight Delrin/Alum products for the 7/16" Crosman barrel (slip fit). They do a fine job for the intended purpose, but there are folks who get "cranky" when they are less effective at higher pressures they were not intended for. Kinda like putting a Ford Fiesta muffler on a Corvette and then not liking the noise that comes out the pipe 

Hi Brian, I get mine custom made over here ok, I was just curious as I bought an LDC off the yellow and expected it to have some internal components, but it was just an empty tube. So I gather from the above posts it is just your code for doofer if it has any insides.

I am after a nice baffled shroud to go with my RJ riser though. Not many options over here for them. I have one on my LD gun but that was from over there in the US.

[BDS]

Hi Brian, I get mine custom made over here ok, I was just curious as I bought an LDC off the yellow and expected it to have some internal components, but it was just an empty tube. So I gather from the above posts it is just your code for doofer if it has any insides.

I am after a nice baffled shroud to go with my RJ riser though. Not many options over here for them. I have one on my LD gun but that was from over there in the US.

Got it... ya, there are one or two makers over here who do the BIG RED LETTERS on their websites about NO INTERNALS, NO BAFFLES etc, IMO, they are running scared of the BATF and just make tubes for looks. and no function, why bother?

[1377x]

The LDC I got was lust an empty tube.

Yes JG were the only place that I could find that had the mark 1 spares I wanted.

should came to me before going there.i can get most obselete parts

[Fronzdan]

Yesterday I got:

FT piston/valve from Mellon...I'd forgotten about that order.
Pair of zebra wood combat grips from Keith Eisler.
A Webley Alecto, which is a monster of a pistol.  Will post some pics when I get around to it.

[BDS]

Yesterday I got:

FT piston/valve from Mellon...I'd forgotten about that order.
Pair of zebra wood combat grips from Keith Eisler.
A Webley Alecto, which is a monster of a pistol.  Will post some pics when I get around to it.

Nice... short or long barrel Alecto? Supposed to be a great shooter 

[1377x]

Yesterday I got:

FT piston/valve from Mellon...I'd forgotten about that order.
Pair of zebra wood combat grips from Keith Eisler.
A Webley Alecto, which is a monster of a pistol.  Will post some pics when I get around to it.

i want to see a pic of the grips!