• Welcome to Crosman Air Pistol Owners Forum.

Notched Sights and Front Sights Are HUGE

Started by Davio, October 03, 2012, 09:24:10 AM

0 Members and 2 Guests are viewing this topic.

fivestar45

If this is the sight you ordered, it's for Sheridans. It mounts on the right side and requires a flat to be milled in the breech. So it can't be used on a gun with a right side bolt, possibly you may be able to turn it backwards and cut the flat for it on the left side of the breech, but I'm not sure about that.
http://www.amazon.com/Crosman-64-Williams%C2%AE-Peep-Sight/dp/B0002IKE6K

Davio

#16
I hope since it is an option for the CCS 2300 and 2400 that it can be made to work.  If not, I can always twist the peep hole off with some pliers and duct tape it to the back of the breech, then spray the whole thing with bedliner and put some poorly cast aluminum grips on it and name it POS.  ;D  (probably turn out to be the best gun in the bunch).
Silence is golden. Duct Tape is silver. Gravy is brown.

2400KT bulk fed repeater .22
2260 .22 w/ steel breech
2250XE .22
Benjamin Discovery .22
Benjamin Marauder .25
Crosman 1077 WOOD .177
Crosman 1077 BLACK .177
Benjamin NP Trail .177
Crosman 2240 Camo .22
Crosman 2240 polished .22
Crosman 2300KT .22
Dan Wesson 8" .177
Crosman Vigilante .177
Hatsan A44PA .25
Hatsan A44W .25
Sheridan 2260
Benjamin Trail NP XL .25
Benjamin Titan NP .22
Benjamin Marauder Pistol .22
Benjamin 392 .22
Sheridan C9 PB 50th Anniversary .20
Crosman 1701-P .177

Davio

Quote from: fivestar45 on October 10, 2012, 01:32:35 AM
If this is the sight you ordered, it's for Sheridans. It mounts on the right side and requires a flat to be milled in the breech. So it can't be used on a gun with a right side bolt, possibly you may be able to turn it backwards and cut the flat for it on the left side of the breech, but I'm not sure about that.
http://www.amazon.com/Crosman-64-Williams%C2%AE-Peep-Sight/dp/B0002IKE6K

You are correct, sir and the sumbeach has been sent back to PA... but, all my searching had been for "peep" and I came across a new word for me "Diopter" and found that the Williams Diopter peep will fit our guns, so I asked for an exchange (4 cents more).  That should be better.   
Silence is golden. Duct Tape is silver. Gravy is brown.

2400KT bulk fed repeater .22
2260 .22 w/ steel breech
2250XE .22
Benjamin Discovery .22
Benjamin Marauder .25
Crosman 1077 WOOD .177
Crosman 1077 BLACK .177
Benjamin NP Trail .177
Crosman 2240 Camo .22
Crosman 2240 polished .22
Crosman 2300KT .22
Dan Wesson 8" .177
Crosman Vigilante .177
Hatsan A44PA .25
Hatsan A44W .25
Sheridan 2260
Benjamin Trail NP XL .25
Benjamin Titan NP .22
Benjamin Marauder Pistol .22
Benjamin 392 .22
Sheridan C9 PB 50th Anniversary .20
Crosman 1701-P .177

bodger

could have sworn ide seen the williams site suitable for the crosman refered to as the 64, i look forward to finding out the correct info