What work did you just do?

[targettgii]

No haven't shot it yet hopefully on my days off I'll get the chance to shoot it.

[1377x]

put a rjmachine riser breech on my 1377 today
cutting the transfer port was a fun task

[ped]

I talked with Gary the other day and ordered his INTEGRABASE for my Blue Streak.  Perhaps I can act as a go between if you are interested in his INTEGRABASE.

Carl

cheers carl pm sent
ped

[ped]

put a rjmachine riser breech on my 1377 today
cutting the transfer port was a fun task

i hate cutting poly ports too usually takes a couple of attempt till i'm happy
ped

[droid]

I had a tidy up with my spares box with a view to selling them on.

So far I have built 2 x 2240s and 3 x 2250s, they are all too nice to sell though, so I am back where I started now 

[Davio]

I have been working on a new formulation for grips. I will know in about 20 hours (very long cure time) whether they have the intended properties of durability and cushioned feel (and hopefully nice to look at as well). Wish me luck  (although luck has nothing to do with anything).  If successful, this will lay the groundwork for the "Michelin" build I tossed out a few days ago.

[KevinP]

Cool ... 

[ped]

I have been working on a new formulation for grips. I will know in about 20 hours (very long cure time) whether they have the intended properties of durability and cushioned feel (and hopefully nice to look at as well). Wish me luck  (although luck has nothing to do with anything).  If successful, this will lay the groundwork for the "Michelin" build I tossed out a few days ago.

will these be a like the pachmayr rubber grips in feel as somebody who successfully manages to make them will sell alot i imagine
look forward to seeing them
ped

[1377x]

i hate cutting poly ports too usually takes a couple of attempt till i'm happy
ped

like you said it took a couple of tries good thing there was a long enough piece of poly tubing that came with the breech
I need to go to the hydroponic store and pick up some micro sprinkler irrigation line I like the material an inside diameter of that stuff.its nylon I think and the id is .161 matches my other ports correctly

[bgmcgee]

Put the pro-top in my 2300, liking it so far.

[1377x]

Put the pro-top in my 2300, liking it so far.

if I had a co2 gun it would have a protop in it

[quickster47 †]

Put the pro-top in my 2300, liking it so far.

The ProTop is great.  I think I have four or five of them on my different CO2 guns.  Only thing is using the OEM gas caps is a pain so use the ones from HPA Sports.  It makes piercing the powerlet very easy.

http://www.hpasports.com/pages/product-catalog-detail/CO2_Extended_Gas_Cap_for_Crosman_Model_2240?previous_url_id=1

Carl

[bgmcgee]

Hit the extended one already.

[Davio]

I have been working on a new formulation for grips. I will know in about 20 hours (very long cure time) whether they have the intended properties of durability and cushioned feel (and hopefully nice to look at as well). Wish me luck  (although luck has nothing to do with anything).  If successful, this will lay the groundwork for the "Michelin" build I tossed out a few days ago.

Result:  Looks great, but much too soft.  Think gelatin.  I need to bring the shore hardness way up.  Learning here, so not a complete loss. I'll be back.

[brz-ryder †]

Modding my Mini lathe putting a new bed on it to give a longer between centers also going to 5" chucks 3 and 4 jaw   

Jim