What work did you just do?

Trophyhunter49 · July 07, 2013, 02:58:51 AM

Worked on my two SECRET projects today!! It want be long befor they are posted on the guantlet page

Also hand loaded some bp today,.223 .357 .38 30-30 and 30-60

rws_53 · July 07, 2013, 03:35:29 AM

Got my Custom Shop 2300KT on Friday from Crosman...polished the sear, put some chongman trigger/sear pin shims in, reduced the trigger pull adjustment and set trigger over travel screw.. Now to do some test firing.

KevinP · July 07, 2013, 07:32:31 AM

Quote from: Trophyhunter49 on July 07, 2013, 02:58:51 AM
Worked on my two SECRET projects today!! It want be long befor they are posted on the guantlet page Also hand loaded some bp today,.223 .357 .38 30-30 and 30-60

A busy day for sure !!!!!!!!!!!!!

Tater · July 07, 2013, 08:54:59 AM

That looks great Mr. McGee.

I can't believe it only took 10 minutes. I needs me a buffing wheel.

mudduck48 · July 07, 2013, 06:58:28 PM

I just made a cooler holder out of the PA pellet packaging.

Hot glue gun.

HappyHunter · July 07, 2013, 07:08:11 PM

Great idea!

BillK · July 07, 2013, 07:15:53 PM

I just KNEW they could be used for something.

I think I tossed them anyway.

bgmcgee · July 07, 2013, 07:39:57 PM

Quote from: mudduck48 on July 07, 2013, 06:58:28 PM
I just made a cooler holder out of the PA pellet packaging. Hot glue gun.

Well ain't that just ducky.

I like it.

YSYEO · July 07, 2013, 09:05:36 PM

Quote from: mudduck48 on July 07, 2013, 06:58:28 PM
I just made a cooler holder out of the PA pellet packaging. Hot glue gun.

Very cool idea!

I saved some, now if I could just find where I put it!

Davio · July 08, 2013, 12:09:42 AM

Cool item (no pun intended) that only seems to need a CAPOF STICKER!

WyoMan · July 08, 2013, 03:08:43 AM

Quote from: mudduck48 on July 07, 2013, 06:58:28 PM
I just made a cooler holder out of the PA pellet packaging. Hot glue gun.

Pretty nifty

and will keep your can from getting dented if you drop it

Davio · July 08, 2013, 04:36:41 AM

...and where did you find the Malt Duck? Haven't seen that since the '80's.

Fronzdan · July 08, 2013, 05:37:04 AM

Haha great use of the pellet packing! I just threw it away from a four pack.

crossliner · July 08, 2013, 09:30:35 AM

Replaced my polished ss cap bolt w/ a domehead ss allen bolt..Also polished..I like it better than a solid pin..I had the tube threaded btw..Also had an ss cap fabricated as I don't like acorn nuts..Even w/o the nut it does not move as the bolt locks solid..I like looking at it it's cute but others may not agree

Here is the Mr. Mudduck pivot arm washer mod..It's all work and no play

In case you are wondering what that black washer thing is between the tube and the ss plug that is a delrin washer that I had fabricated..It's cnc made btw. The maker (a branch of SKF bearings) fabricates custom made seals and packings. Regards.

BigErn · July 08, 2013, 04:56:50 PM

Quote from: crossliner on July 08, 2013, 09:30:35 AM
Replaced my polished ss cap bolt w/ a domehead ss allen bolt..Also polished..I like it better than a solid pin..I had the tube threaded btw..Also had an ss cap fabricated as I don't like acorn nuts..Even w/o the nut it does not move as the bolt locks solid..I like looking at it it's cute but others may not agree

Here is the Mr. Mudduck pivot arm washer mod..It's all work and no play

In case you are wondering what that black washer thing is between the tube and the ss plug that is a delrin washer that I had fabricated..It's cnc made btw. The maker (a branch of SKF bearings) fabricates custom made seals and packings. Regards.

Looking real sweet Mr. CL