• Welcome to Crosman Air Pistol Owners Forum.

What work did you just do?

Started by Fronzdan, October 27, 2012, 04:25:40 PM

0 Members and 11 Guests are viewing this topic.

KevinP

Kevin
Albany, New York

bgmcgee

"I've lost what's left of my right mind"

CraigH

Craig
Lone Tree, Colorado

With freedom comes a terrible responsibility

Tater

Jerry

NW Chicago suburbs

beejwest

Full blown Crosmaniac.

Old Dog

Looks good, add a ghilly suit and you would disappear in the woods :-* :-* :-*

Bill :)
This Old Dog has outlived most of my enemies!!!
Many of my friends also, sorry to say!!!

targettgii

Tom

Modded 1377
Modded 2240
Modded 1322
1750 HPA pistol
Stock 2260(for now)
.22 Gen.2 Marauder
CCS 2300
Custom 1740
38 T

Tommy

Today I rermoved from my custom 1300KT the LW barrel, breech and instaled it on my 2240.  Now I will need parts to put the 1300KT back togeather.  The 2240 stock barrel is too short and the plastic breech has to go.  Just sent a message to Rich at Ye ole Airgun Shop asking about an aluminum breech.

LARIFLEMAN

Today I changed out my 2250 tube for a 2260, I just need a longer for end now.

beejwest

OK, my 2260 project has finally taken off.  First round of paint didn't go so well.  I botched it up pretty good in a misguided attempt to put it together not cured.  So I stripped all the paint off and re-prepped all metal.  In the interim I also had my stock ebonizing stuff getting ready.  I'll post a full up write up in about a week with pics, but the stock is done now, curing, and paint (round #2) is also curing.  Will Post pics soon. 
Full blown Crosmaniac.

beejwest

Stuff was finally cured enough to work safely with!!  Never checked with mods to see if 2260's were ok to talk about so if not I won't do a write up and I we can move this to general airgunning or wherever.  Anyways it's 12:30AM and I just got done (big Friday night eh?) with this thing so the lighting isn't the best but until tomorrow here is some pics!

Brief list of work:
1. Stripped stock and ebonized with iron acetate and quebracho tea
2. Stripped all metal of bluing primed and repainted
3. Did the 3 screw trigger mod and cleaned and polished all internals. 
Full blown Crosmaniac.

twigboy

THAT is beeeeauuuutiful!  What sort of primer?

beejwest

Krylon for metal.  Then Krylon camo topped off with krylon matte clear coat.  And thanks!
Full blown Crosmaniac.

BillK

Very nice!  That is a lot of good work & it shows.
West Michigan
Crosman Nitro Venom .22
Crosman 760 - 782 - 1077
Sheridan S S - H - E9
Benjamin NP pistol - Disco - Prod
MIC B1 .177
2300S - 2300T - 2400kt
1740 - 2240 - 2250 - 1760 - 2260 - 1701P
1322 - 1377
MK I & II

mudduck48

We need to keep going and have fun doing it.