What work did you just do?

[1377x]

looking good targettgii!

i received my tko 1911 trigger installed it  then immediately removed it. sanded off the brushed finish,it felt real gritty when pulling the trigger.polished the contact points to a mirror finish and put the tko spring kit in with the 1911 trigger
now its a real smooth light,short trigger pull.its extremely light had to do the bump test.i didnt have to lube it after the polishing its so smooth

[ped]

still waiting for my 1911 triggers looks like the first ones have got lost e mailed mike and he's resending some top guy
ped

[droid]

Been working on the secret project gun again

Ped, once i get the hex breech screw out I bin them every time.

Slot head screws will be out to you Monday mate.

[Davio]

I have been breaking in my new fossil blaster on a soon to be special Crosman grip frame for a forum brother.

[quickster47 †]

I have been breaking in my new fossil blaster on a soon to be special Crosman grip for a forum brother.

Tell me something about your fossil blaster.  Looks interesting and something I might NEED. 

Carl

[1377x]

I have been breaking in my new fossil blaster on a soon to be special Crosman grip for a forum brother.

what does it do sounds like it uses media other than sand and bead

[Davio]

Dang, you guys are GOOD ! 

It uses less pressure (20 psi to 60 psi range) and requires as little as a 1/2 hp compressor.  It uses any media in the 40 to 100 micron range (120 grit or smaller size / larger number, though... approx. 120 to 220 mesh size).  It has dual media pots with hoses and tips inside the chamber and can be swapped back and forth on the fly with the pull or push of a knob (although I am re-using my media and do not want them mixed).

It is a kinder and gentler blaster... thousand points of light and all that.   

I am liking what it is doing thus far.

[chongman]

You are my idol David 

[Davio]

You are my idol David 

Ditto.     Oops,wrong thread.  That was from the movie Ghost.   

[Davio]

I just laid out the road map for a supremely custom gun that will be named Maximus Prime.  Gimme a week and we'll do pics. No less than twenty (20) upgrades will be incorporated.

[1377x]

i didnt realize there was 20 parts to these guns
cant wait to see it

[quickster47 †]

Dang, you guys are GOOD ! 

It uses less pressure (20 psi to 60 psi range) and requires as little as a 1/2 hp compressor.  It uses any media in the 40 to 100 micron range (120 grit or smaller size / larger number, though... approx. 120 to 220 mesh size).  It has dual media pots with hoses and tips inside the chamber and can be swapped back and forth on the fly with the pull or push of a knob (although I am re-using my media and do not want them mixed).

It is a kinder and gentler blaster... thousand points of light and all that.   

I am liking what it is doing thus far.

Okay, since you didn't really answer this, what model is it and where did you get it?

Carl

[Davio]

Sorry, Carl.  You said tell me something about and I told you allot about.  Here you go, buddy. 

http://micronblaster.com/Micronblaster/About.html

[quickster47 †]

Sorry, Carl.  You said tell me something about and I told you allot about.  Here you go, buddy. 

http://micronblaster.com/Micronblaster/About.html

Yes you did but being sometimes anal, I wanted more...

Thanks very much.  I just ordered one and have lots of plans to make good use of it.

Carl

[Davio]

i didnt realize there was 20 parts to these guns
cant wait to see it

20 upgrades is conservative.

Ed, I gotta do something!  Chongman been kicking my butt while I had my head down.  I gotta raise the stakes.