What work did you just do?

[1377x]

Hey 1377x nice call on the sp1 very nice works great 

glad you like it!!!
i sure like mine.its nice and light too. i have a tasco pdp3 rd its nice also but its a little on the heavy side so i am putting on my OOGIE BOOGIE gun its for short range pesting so a scope really isnt necessary

on another note
i moulded some .25 pellets from my beeman/lem pellet mould.i have no idea what i am doing so i need to read up on bullet/pellet moulding
the first one came out pretty nice then the second one had some issues maybe the lube ran out or something but some research is definitely called for
heres a pic of my mould

[cmj21973]

glad you like it!!!
i sure like mine.its nice and light too. i have a tasco pdp3 rd its nice also but its a little on the heavy side so i am putting on my OOGIE BOOGIE gun its for short range pesting so a scope really isnt necessary

on another note
i moulded some .25 pellets from my beeman/lem pellet mould.i have no idea what i am doing so i need to read up on bullet/pellet moulding
the first one came out pretty nice then the second one had some issues maybe the lube ran out or something but some research is definitely called for
heres a pic of my mould

If you haven't already found a source of info about lead casting.
http://www.zjstech.net/gunstuff/casting.html

[ped]

thats a rare thing you've got there ed (i think they stopped making them in the eighties when mr mcgquire retired)
never really cast pellets but do make a lot of fishing leads and jig heads and i've found that the first couple are not very good due to the mould not being up to temp, after that the're usually ok
how hot are you getting your lead?
i seem to recall that these lead moulds were hard to use and the pellet was only suitable for rifles in excess of 12fpe due to there weight,hope you get the hang of it ed as they'll go well in that monster .25 you've got
ped

[crossliner]

Well not actually did but had done..Powdercoated grips and bb all for $3.65..It was originally $2.43 but I did not like the flat black version ( my decision at 1st ) so I had it redone and they charged me an extra $1.22..Included are pics of my fave pellets they are locally made and are a tight fit for the Crosman barrels but Crosman Premieres, RWS and JSBs just can't beat them..All my Crosmans except the 1 w/ a Lothar barrel ( it likes JSBs) become 1 holers..Unfortunately the factory who makes them is no longer in business..I bought about 280 plastic containers of the Eaglehead 8.8 grain domes ( I got lucky I found some in a hardware store in a rural area an old stock ) x 150 = 42,000 pellets..Sold some to my friends though..The Hammerhead wads are still aplenty in various stores being not very good for long distance shooting..







..ain't she smooth 

[KevinP]

Turned out nice !!!   

[crossliner]

Yes sir and super cheap too 

[chongman]

Real nice finish    What's with the pins in the frame 

[BigErn]

Very nice!!!!

[crossliner]

Real nice finish    What's with the pins in the frame 

Thanks Mr. CM..They are not pins them are pellets dear sir 

[chongman]

OK, my eyes are a little fuzzy this morning 

[JEBert]

Thanks Mr. CM..They are not pins them are pellets dear sir 

Did you do that for the photo or was it to keep the powder coat out of the holes?
Edit:  Come to think of it, they wouldn't have fit in the screw holes and you have more pellets than there are holes.  I just don't think of using all of the props you guys use in your photos.
Cheers,

[Davio]

Yes sir and super cheap too 

Meh.  I get all mine done for free.   

[crossliner]

Did you do that for the photo or was it to keep the powder coat out of the holes?
Edit:  Come to think of it, they wouldn't have fit in the screw holes and you have more pellets than there are holes.  I just don't think of using all of the props you guys use in your photos.
Cheers,

Mr. JB a good observation..I plugged the holes w/ rolled paper and at the time I took some pics there were still there..I accidentally poured more pellets as intended so I just put them some of the excess on the grips erratically for show.

[crossliner]

Meh.  I get all mine done for free.   

Mr. Davio I think we had a bit of misunderstanding I apologize..We are all friends here and I find it uncomfortable to have some sort of a friction w/ others. Your powdercoating job is very nice and this will benefit members who are w/in your periphery. Best regards.

[tipper1]

looks nice, why not the trigger cover, no powder coat on it