What work did you just do?

[USMA-1982]

PS - Droid, I like your Ratbuster website.  Nicely done.

[DaveB50]

Nice looking Pistol Ed. Maybe Frankengun would be appropriate. 

[BigErn]

Great work Fronzdan and USMA 

[USMA-1982]

Haha - Frankengun.  It lives!  Here's the first string of five off hand at 5m.  Not bad, should be able to adjust on to bullseye at 10m no problem.  The flier was my first shot.  Trigger was a bit stiff and brand new cart of course.

[droid]

PS - Droid, I like your Ratbuster website.  Nicely done.

Cheers Ed 

[crossliner]

Had an ss muzzlebrake adapter made today..The barrel is not mounted yet I dissembled the gun it now has 3 set screws on the breech because it's free floated..

Gonna change the forearm tomorrow I have 2 from Mr. Quickster thanks a lot again sir 

Also I am going to scope it and remove the BSA red dot I don't like it anymore..The lens has become foggy..Got a cheapo but reliable UTG 4x32 w/c I am going to pair w/ BKL mounts..For scope rings/mounts it's Sportsmatch or BKLs for me no less 

[BigErn]

It's like Christmas there already Mr. CL!

[Tater]

Mmmmmmm....night vision...

/Homer Simpson voice

How good does it work? I always thought that would be something really cool have, een to just check out the yard at night when the ding donger goes off.

[brz-ryder †]

Did the air spring mod and the power feed on my mini mill if anyone is thinking of doing this mod save yourself some grief and go to Lowe`s or Home Depot and get 2 m6x 1  20mm lg socket cap screws . I found out the ones they sent with the air spring kit were to short only about 1/4 inch sticking out when placed in the bracket and the instructions don`t go with when you have to take the old spring out you need to do the rack then take out the old spring the new rack gives you 5" more travel up and down

Jim

[crossliner]

It's like Christmas there already Mr. CL!

Yes Mr. BE but not everything is for my own use i sell them 

Mr. Tater it's a Russo made nv not really top of the line as it's only less than $200..It's decent though for its price..My most expensive accessory purchase lately is the Aimpoint T1 Micro 2 moa..It will be handcarried by my cuz..

http://www.amazon.com/Micro-T-1-Scope-Standard-Mount/dp/B007GH4JS4/ref=sr_1_4?ie=UTF8&qid=1373777972&sr=8-4&keywords=aimpoint+micro+t-1

Also this rangefinder..

http://www.amazon.com/Nikon-PROSTAFF-7-Laser-Rangefinder/dp/B00B9IKYRQ/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1373778125&sr=1-1&keywords=nikon+pro+staff+7+rangefinder

You may think it's very expensive but you should see the prices of these items in the Philippines..Regards.

[Davio]

Did the air spring mod and the power feed on my mini mill if anyone is thinking of doing this mod save yourself some grief and go to Lowe`s or Home Depot and get 2 m6x 1  20mm lg socket cap screws . I found out the ones they sent with the air spring kit were to short only about 1/4 inch sticking out when placed in the bracket and the instructions don`t go with when you have to take the old spring out you need to do the rack then take out the old spring the new rack gives you 5" more travel up and down

Jim

Pictures and detailed instructions or it never happened!   

[brz-ryder †]

Pictures and detailed instructions or it never happened!   

LOL i`ll post the pictures after all the mods are done i have to make some spacers to mount the DRO`s once i get them mounted Ill post the pictures on the machining space

Jim

[Petrifiedwood]

Went back more "stock-ish" on my 2300T. I installed a Crosman brake, and filed the front sight pin down a bit, then blackened it with a Sharpie marker. The gun was shooting a bit low with the pin the way it came from the factory, even with the MIM sight raised up to the extreme upper limits of it's travel (adjustment screw on the verge of being loose). This modification allowed me to crank the rear sight back down to a normal setting and still be reasonably on target.



I've decided to save my BNM breech for another project, perhaps upgrading my Discovery some time. I just prefer the look of the pistol in it's basic, mostly stock appearance.

I also ended up removing the steel breech a second time after noticing a puff of air on my hand when shooting. I guess I had the transfer port installed upside down. Flipping it so the larger end was "up" and re-installing it eliminated the puff of air and it felt like it was shooting with more power.

[BDS]

Very nice P-wood... sight pins are always trial and error, you got the fix just right!

[agninja]

Just got a metal barrel band for my 1377. I put it on and found out that it slightly interferes with the pump arm when it is fully retracted.  I tried to take off the pump arm so I could carve out a groove with the Dremel, but I apparently don't know how to remove it. No matter what I stuck in there to remove those pins they didn't budge.

I ended up just using a thin cone shaped sanding bit on the Dremel and carefully carved out a grove with the pump arm still on the gun. Now it no longer touches the barrel band when cocking and you can't even tell that anything was done.