What work did you just do?

[ped]

moly paste is good or i've been using some lubriplate thats i get off my dad who fits dental chairs(the chairs it comes with is made in the us and comes with good quality imperial allen keys )
i think the lubriplate is used for engine assembly like moly paste is but i only use a little and polish it in
ped

[Gippeto]

..... any suggestions ?

Given the variety of temperatures I encounter when shooting...+34C to ~-15C, I gave up on oils and greases...even synthetics change viscosity too much. Switched to this....works great as far as I'm concerned.

http://www.jigaloo.com/us/e_products_graphite-extreme.php

Al

[mudduck48]

I got my 38T working. Bored this after noon, wanted something to work on. Put my new rear sight on and my new grip panels on. Stuffed a cart in and pissssss, it leaked a little. So, I decided just to shoot it. After about 12 shots, it quit leaking. O-BOY. I shot out the cart and put in another one, no leaks. More O-BOY! Shot 50 shots out of cart number 2. It WORKS! O-BOY!!! That is 5 shots, 5m one hand.

[BillK]

Nice looking 38.  Real nice looking target.  That's some fine shooting.

[targettgii]

Nice work Ducky some nice shooting too.

[BDS]

Quack quack Ducky old boy

There's a lot of 38 Ts and Cs for sale lately, they are great guns 

[mudduck48]

I have only shoot this with 2 carts so far and I'm really impressed. The first cart hissed and pissed and I decided to shoot. After 12 shots it quit hissing. Cart #2, I got 50 shots out of, I think it is working now. 

[mudduck48]

I rebuilt my black handled 130. It works!  This is my first attempt at shooting it. And that is Davio's roll pin replacement.

[BigErn]

I rebuilt my black handled 130. It works!  This is my first attempt at shooting it. And that is Davio's roll pin replacement.

Very cool mudd, love those 150 frames.

[BillK]

Nice shooting & a very nice looking 130.

How do those compare with the 13xx series?  Pump effort, power etc.

[targettgii]

Good work Duck.

[mudduck48]

This defiantly has been a learning experience. Now, I have to figure out how to take the phaze 1 apart and fix it. I'm real good on the 1300 guns, but I'm learning on the older ones.    
It's the one with the wood grips that is next.

[vertguy]

One step closer to adding the 1701P trigger frame to my 2400KT as I modified the new hammer to work with the rear breech screw. I was planning on just using the striker that I ordered, but think I will try the 1/4-28 grub screw approach so the stroke will start out the same as the stock hammer.

Before



After... not pretty, but it should work just fine.

[breakfastchef]

I was planning on just using the striker that I ordered, but think I will try the 1/4-28 grub screw approach so the stroke will start out the same as the stock hammer.

If you use the grub screw, set it up so you can remove it at a later time. I found the striker to come in handy on a build I made last year that was not running very efficiently. Having the adjustable striker helped control the flatulent condition.

[vertguy]

If you use the grub screw, set it up so you can remove it at a later time. I found the striker to come in handy on a build I made last year that was not running very efficiently. Having the adjustable striker helped control the flatulent condition.

That was the plan as I will simply flatten the exposed end and thread it into the hammer just like the striker.