• Welcome to Crosman Air Pistol Owners Forum.

What work did you just do?

Started by Fronzdan, October 27, 2012, 04:25:40 PM

0 Members and 1 Guest are viewing this topic.

mudduck48

We need to keep going and have fun doing it.

KevinP

Quote from: BillK on April 09, 2016, 02:14:21 AM
I have been cloning a Crosman 180 from available parts.  I have a lot of stock work left, but I did get to shoot it. :)


I have a 180 also, what is that on the end of the barrel, and where may I get one ?
as is , it has  a little two much bark coming from mine.

Is that the type 3 trigger ?
Kevin
Albany, New York

BillK

#3167
What I have is a 2250 tube w/a 2260 trigger & 16" Crosman barrel w/a TKO & sight mounted on it.  Sights are Williams & breech is Bakers, rear cocking is a ssp hammer unit.  I had an old 2260 stock I cut down to appx. a 180 size to fit the 2250 configuration.
I think of it as a 180 clone.
West Michigan
Crosman Nitro Venom .22
Crosman 760 - 782 - 1077
Sheridan S S - H - E9
Benjamin NP pistol - Disco - Prod
MIC B1 .177
2300S - 2300T - 2400kt
1740 - 2240 - 2250 - 1760 - 2260 - 1701P
1322 - 1377
MK I & II

targettgii

That is a sweet llooking build Bill. :-* :-* :-*
Tom

Modded 1377
Modded 2240
Modded 1322
1750 HPA pistol
Stock 2260(for now)
.22 Gen.2 Marauder
CCS 2300
Custom 1740
38 T

CraigH

Nice build!   :-*   Rather similar to what I have suggested to Crosman as a new model in th 22XX line.
Craig
Lone Tree, Colorado

With freedom comes a terrible responsibility

tinker

(Tinker)
If it's not broken then modify it!

oldgearhead

J-B or GooGone?
Tissue test and Q-tips
JSB Exact or LUM-77?
Longer barrel?

BigErn


Trophyhunter49


Trophyhunter49

  Been working on this for a week or so ! 2250 XL PCP  :) 10 inch .22 cal barrel with costom work done on the valve,BSA Conterder red/green aim point. Shooting Crosman HPs avg. 543.7 fps

mudduck48

Nice, you had better save some of your builds for the Gallant.  :-*
We need to keep going and have fun doing it.

Trophyhunter49

Quote from: mudduck48 on April 10, 2016, 02:35:17 AM
Nice, you had better save some of your builds for the Gallant.  :-*
What Gallant ??   ??? ??? ???

mudduck48

#3177
Sorry, me no, no how to spell. Gauntlet. Carl is having another gauntlet build challenge. :P
http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,16377.0.html
We need to keep going and have fun doing it.

Trophyhunter49


airmec

This week I made a 1377 pump arm pin removal and installation tool, and I started the build of a two-stage piston for that SSP 1377. Outer piston in brass, and inner piston in SS. 8)
Too many projects, not enough time

150
1377 x2
2240 - bone stock
2240 - 12'' barrel, sbk, MIM sight/front stock blade
2240 - 10'' LW .177, sbk, Williams sight/front FO, 2-stage trigger and more
357-6
C41
Benjamin EB22 & HB22