What work did you just do?

[KevinP]

That came out NICE  ...   

[bgmcgee]

Looks great.

[CraigH]

Very Nice!     

[Tater]

Looks great beejwest.

[beejwest]

Thanks everyone!

[Old Dog]

Looks good, add a ghilly suit and you would disappear in the woods

Bill

[targettgii]

Great paint job.

[Tommy]

Today I rermoved from my custom 1300KT the LW barrel, breech and instaled it on my 2240.  Now I will need parts to put the 1300KT back togeather.  The 2240 stock barrel is too short and the plastic breech has to go.  Just sent a message to Rich at Ye ole Airgun Shop asking about an aluminum breech.

[LARIFLEMAN]

Today I changed out my 2250 tube for a 2260, I just need a longer for end now.

[beejwest]

OK, my 2260 project has finally taken off.  First round of paint didn't go so well.  I botched it up pretty good in a misguided attempt to put it together not cured.  So I stripped all the paint off and re-prepped all metal.  In the interim I also had my stock ebonizing stuff getting ready.  I'll post a full up write up in about a week with pics, but the stock is done now, curing, and paint (round #2) is also curing.  Will Post pics soon. 

[beejwest]

Stuff was finally cured enough to work safely with!!  Never checked with mods to see if 2260's were ok to talk about so if not I won't do a write up and I we can move this to general airgunning or wherever.  Anyways it's 12:30AM and I just got done (big Friday night eh?) with this thing so the lighting isn't the best but until tomorrow here is some pics!

Brief list of work:
1. Stripped stock and ebonized with iron acetate and quebracho tea
2. Stripped all metal of bluing primed and repainted
3. Did the 3 screw trigger mod and cleaned and polished all internals. 

[twigboy]

THAT is beeeeauuuutiful!  What sort of primer?

[beejwest]

Krylon for metal.  Then Krylon camo topped off with krylon matte clear coat.  And thanks!

[BillK]

Very nice!  That is a lot of good work & it shows.

[mudduck48]

Good work, really nice.