EBAY AGAIN? and AGAIN

[mudduck48]

You can't buy pellet guns on ebay. Yea, right.  Crosman 38T. Needs some work, but, I think I got a good deal. Even had a unused 12g bottle cap cart in it.  Now I need some parts. I need the rear sight and the right and left grip panels to start. Haven't charged it up yet to see if it works. It is the .22cal  version. Nice.

[1377x]

what was the ticket cost?
need to know what kind of deal you got
looks to be in better than good shape
anything less than $30 is a good deal i hear.i usually find them for $15

[jSan22]

you cant, but you can. just have to catch the deals before they disappear to the ultimate life form AKA ebays gestapo.

[mudduck48]

Yes, you can not buy pellet guns on ebay, or should I say off ebay. Crosman 1322 Medalist, owners manual and a thing to go around your wrist that holds pellets.

[1377x]

sweet
someone has been in it and didnt assemble it right
good project!!!!
congrats

[Tater]

Is that a piece of conduit screwed on to the breech?

[cmj21973]

Nope, that's the loading sleeve.

[mudduck48]

Here, Ed are some more pics

[1377x]

according to the evp a 140 bolt was used in the phase1 1322
i am interested to see what the piston looks like

[cmj21973]

according to the evp a 140 bolt was used in the phase1 1322
i am interested to see what the piston looks like

mudduck48's 1322 is a phase II.Grip frame has that round pinky bumpout and two piece grip covers.

This is the piston from my 1322 phase I.

[mudduck48]

according to the evp a 140 bolt was used in the phase1 1322
i am interested to see what the piston looks like

Here is the piston.

[1377x]

thats the first time i have seen the plastic piston with a stock hollow probe
i guess when they made the .22 pumpers back then, they didnt want to make a new bolt and just used the 140 pistons

[mudduck48]

Here are some more pics. I took the grip frame off changed the spring, put the 22lr case in and smoothed up the contact points. Strange grip frame and the trigger has a flair at the bottom.  I put electrical tape on the trigger guard to keep from scratching it. The trigger and sear are both steel. And I looked inside and it has an aluminum valve in it.

[1377x]

it should have had a brass valve since they didnt start putting aluminum valves in until the newer models
even some phase 3 1377's have brass valves like the ones that came in abox
thats too bad but i knew someone was in it before
they probably either kept the brass valve or thought the valve needed replacing
i have the same grip frame on my custom 2300
i was going to sell it to another forum member but never heard back from them
so i got internals and used it

[mudduck48]

The guy I bought this from said that he had the "seal" replaced. I think that who ever worked on this just put a new valve in it and said, here you go. Not too much of a problem, the gun pumps real hard and shoots real good. I think this is a parts car.