• Welcome to Crosman Air Pistol Owners Forum.

Help on UK spec transfer port part number please

Started by droid, November 21, 2012, 05:07:28 PM

0 Members and 2 Guests are viewing this topic.

droid

Hi guys,

I am sure you may be aware that the UK spec 2240 is kept under power by utilizing a smaller transfer port than normal Countries.

The normal TP everywhere else spec is 3.5mm bore and also used on the UK 2250 this part number is 1322A026

What I need is the smaller version part number for the 2mm bore version.

Any help with this will be much appreciated.

Cheers
Gary
Full Brass 2240, Custom 2300s, Custom 2250XL, Custom Beretta PX4 Storm, Custom SAI 1911 MEU
www.ratbuster.co.uk

cmj21973


droid

Quote from: cmj21973 on November 21, 2012, 05:35:25 PM
It may be 7-2289-001 (7-1322).
It's the sleeve from this EVP: http://www.crosman.com/pdf/manuals/crosman/1377/C1377-EVP.pdf

Thanks CM, yes that is the actual one they use in the restricted guns.

The normal size used by everyone else is 0.140" ID (9/64") or 3.5mm in UK money

The restricted one (UK/Canada) is 0.109" (7/64") or 2.7mm in UK money

That difference will put a standard UK 2240 either very close too or over the 6ft lb limit.

Cheers
Gary

Full Brass 2240, Custom 2300s, Custom 2250XL, Custom Beretta PX4 Storm, Custom SAI 1911 MEU
www.ratbuster.co.uk

1377x

you can fill the standard .140 transfer port in with jbweld and drill the size hole you want in it after it sets
closed mouths dont get fed

droid

Not sure if we have JB Weld over here Ed. I did consider reducing with a washer bit now have the issue sorted see below.

Would you believe that we do not have the correct transfer port available over here in the UK !

Gordon at GMAC has come to the rescue though, he is making me a batch of 10 in the 2.7mm bore.

It is more important to me because I have 9" barrels on all my guns which puts me too close to the edge, if I was using 7 3/4" I would still be close but not as bad.

Gary
Full Brass 2240, Custom 2300s, Custom 2250XL, Custom Beretta PX4 Storm, Custom SAI 1911 MEU
www.ratbuster.co.uk

1377x

cool custom built!
are they all the same size at the hole? or are they in various sizes?
im sure you guys have jbweld or similar any epoxy would work too
closed mouths dont get fed

droid

I have just asked Gordon to do me some with a 2.7mm bore but I suppose you could have any bore you want.

The largest bore I have here is 4mm so that is really the max you could order.

Gary
Full Brass 2240, Custom 2300s, Custom 2250XL, Custom Beretta PX4 Storm, Custom SAI 1911 MEU
www.ratbuster.co.uk