got the steel breech on my 2240 and a red dot

[breakfastchef]

What barrel do you have?

If you are referring to my post above on the 2240 platform with the Pro-Top Valve; the pistol had the stock barrel.

[ingrahal]

If you are referring to my post above on the 2240 platform with the Pro-Top Valve; the pistol had the stock barrel.

Sorry I was asking the OP (howie1968).

[howie1968]

I have the factory 7.5 inch im looking at getting a longer barrel also i got the steel breech on and the trigger is sweet i did the compressing of the spring and the polish of the inside and lube and its nice would like a little more power but main thing is accuracy

[ingrahal]

I would recommend a longer barrel. I got an increase of 100 ft/sec going to the 14" barrel and no penalty. Longer sight radius too.

[howie1968]

how does the 14 inch barell aim and point? how is the accuracy?

[ingrahal]

I like it. It feels good and improves your sight picture using the stock sights. The front post looks smaller inside the peep hole and makes it easier to line up left and right. My best group is 5/8" CTC @ 10 yds. I think that is as good as I can do with the plastic breech and stock sights.

[howie1968]

what kind of velocity gain would i have with the 14 inch? alls i plan to do is to punch paper tin cans maybey a rabbit or twp

[1377x]

what kind of velocity gain would i have with the 14 inch? alls i plan to do is to punch paper tin cans maybey a rabbit or twp

if its anything like my old 2XXX gun with 14" barrel,it should be shooting @535fps with cphp just over 9fpe enough to rabbit at 10-15yds or closer

[ingrahal]

I agree with 1377x, I got 100 ft/sec gain and am right at 490 ft/sec with 14.3 gr pellets at 60 deg temperature. At 80-90 degrees it should increase 30-45 ft/sec. That gives right at 9 fpe which qualifies it as a pest control weapon. But at 10 yds it will shoot through 1/4" plywood no problem. I think it would be very effective on rabbits, even body shots. At least on the thin skinned cotton tails I'm used to.

[howie1968]

where can i get a 14 inch barrel?

[1377x]

where can i get a 14 inch barrel?

if you are in the usa crosman if you are looking for a .22 barrel order one for the 2250