1911 Style Triggers for 13xx/22xx - Hold On Tight

[breakfastchef]

Mike at TKO is very close to finally releasing the 1911 style trigger. I have eyed those for months and months, but, alas, I have vconverted over to the 1701P grip frames/trigger group. Maybe he can make a 1911 trigger for that?

http://www.network54.com/Forum/275684/thread/1358212785/The+TKO+%26quot%3B1911-22xx%26quot%3B+Triggers+are+nearing+completion...

[chongman]

I been bugging Mike about those for months!

[Noah]

Good call, Larry!

Yes, I have also had an eye on these for many moons and will hopefully snag one soon. Thanks for the heads up 

[1377x]

nice trigger!
if only the blade was a little wider

[chongman]

nice trigger!
if only the blade was a little wider

The trigger is 1/4" wide.

I talked to Mike this morning, the trigger kits are available now.

[ped]

that looks good might have to have one of these what sort of price are they
ped

[Bill L.]

Just called him,18 bucks. I will have 3 coming today as soon as he has the pay button set up  .

[ped]

cheers bill
ped

[1377x]

The trigger is 1/4" wide.

I talked to Mike this morning, the trigger kits are available now.

it didnt look that wide on the gun
might have to check one out
heck if i dont like it i can always sell it

[Bill L.]

I like the lower adjustment arm idea.With a little polishing I thank it will make a good single stage adjustable trigger.He told me he might add a screw to the arm later for people that can't drill a hole in the frame and tap it.

[Crosshairs]

I just ordered one.
                    Mike

[1377x]

uh oh!
jump on them fast they will be gone soon

[chongman]

And you still won't be as fast as I am 

Order Date: 1/15
Mail Date: 1/17
Receive Date: 1/18 Thanks Mike!

Snatched from the mailbox moments ago! The trigger is nice, very nice. It came with the 6-32 grub screw and one of Mike's hardened steel pivot pins. A small instruction sheet is also included in the ziploc bag. You can go to the TKO website if you want to read it in color.

I'll be using a stock 2240 grip frame with mold markings intact in the place where you must drill and tap for the grub screw. The instructions tell you this is the best way to get the placement right. Just so you know, last night I started working the mold marks off the frame everywhere else 

As this progresses I'll keep you up to date with pictures and notes.

[1377x]

it still looks pretty narrow for 1/4" wide
can someone post a front view? preferrably next to a stock trigger

[ped]

i must admit it does look narrower than a 1/4" i've just emailed mike to see if he'll ship one to uk as they look quite nice