So I bought a "Power Hammer Spring" off eBay for $15.. not only did it get my CO2 stuck in the valve, it also snapped my hammer pin... Is it possible to buy the hammer pin separate...where?
Mod edit: please do not use words like sh... and such, this is a family forum, thanks.
That piece, part number 2100A011, is available from Crosman.
Carl
Yeah, that pin is only $1.15 each :) plus $4 shipping :( ... but about a week or so to get it. >:(
Just PM me your address and I will send you one... my good deed for the new month! ;) I got more of those than I would admit to in forum company. 8)
Heavy hammer springs are very hard on these pistols. I have gone back to stock springs to reduce problems.
I agree with Larry. Increase tension somewhere, and then there is always another place to beef up. Live and learn ;) Must have been an awful strong spring. Never saw that happen before. Might want to check out the stem after a couple pf hundred shots. It is soft steel and will mushroom under the heavier and harder hammer impact. Have seen it on a 13xx with a flat top, but never a 2240 based gun.
that spring had to be over .041 in wire diameter. i have used up to .045 with bolt cocking and the bolt handle started to bend with that
in a pinch you can flip the pin over and pound it into the hole i have seen that done before, it works. you can also use 1.8 drill rod. i had to use a dremel bit that i cut down to size. had to leave it a little long because if the gun flipped over the pin would fall out. with it left longer it couldnt fall out
Newb turned down a free part!? ???
This is an old post from May. The OP has not been on since August, so you can safely assume that he does not need the part anymore ;)
this is an old thread i brought it back to life just in case anyone else missed it
OK, so can we shut e'r down now? Waste o' time, 2 post trolling "expert" >:( :-*
I know when I need parts for my Lexus I have to go on a forum, not do sumthin logical like call Lexus with my year & model and get the part :D
what?
i dont get it
the point is there are other options if this happens other members might get some use out of it