Good day to you all!!!!
I just received my Easton tuned P-Rod and a 2 peice Chavka Grip forearm set, freaking love it!!!!
One point of concern is that the grip area around the safety is too thick and wont allow for your finger to ingage or disingage the safety, i am actually using a BBQ skewer to do the job.
Does anyone know of anybody who can make a longer safety? it only needs about 3/26 on either end and it will work perfectly.
thank you in advance for your help!!!
If Michael Mr Chong don't chime in i can make one for you. Micchael make this man a safety. :-*
I REALLY want to see pics of the gun please!!!
Love Michael's work!!!
(both Michaels actually ;) )
thank you Croshairs!!!
I meant to put 3/16 on both ends, my bad.
sounds like it is possible either way!!!!
If you do it Mike, how many can you make to make it worth your while, Stainless hopefully.
I will post some photos tomorrow of the gun, it is super sweet. Im very tired just brought home our new baby boy last friday.
thanks again guys!
Quote from: cohiba on May 29, 2013, 12:40:08 AM
thank you Croshairs!!!
I meant to put 3/16 on both ends, my bad.
sounds like it is possible either way!!!!
If you do it Mike, how many can you make to make it worth your while, Stainless hopefully.
I will post some photos tomorrow of the gun, it is super sweet. Im very tired just brought home our new baby boy last friday.
thanks again guys!
Baby boy ???
You talking about the gun?!??
;D
Had to seriously think about that for a second. Get it now ;)
CONGRATULATIONS on your new baby boy!!!! :) :-* :-*
I'll bet you're tired! Remember that all to well ;)
No rush on the gun pics. Would just be nice to see it at sometime. Knowing your other guns, and Michael's work... I'll bet it is Nice! ;)
PS - a picture of the new baby boy wouldn't be to bad too ;) :)
Is the Prod safety the same as a 13xx/22xx?
Congratulations On the baby boy cohiba.
Quote from: targettgii on May 29, 2013, 06:28:03 AM
Congratulations On the baby boy cohiba.
x2 ... perhaps you should buy him a new Crosman and keep it unopened till he is old enough to shoot it ? :)
Congratulations on both counts! Two babies to take care of now ;)
Rich
One has a more demanding feeding schedule than the other, that's for sure. :P ;D ;D Congrats on the new baby's, enjoy them both. Post pics....of both.
OK guys here ya go, my 2 new babies.
One is PRod Easton tuned with a 18 inch Easton Shroud (made by gaska) with Michael Chavka Tuxedo!!!!! Wonderfully balanced and Extremely quiet. Easton had Gaska build these shrouds to his specs and inside the barrel is completely floating without touching anything! Right on the money accurate. 3000PSI - 1800 PSI gives me 4 magazines = 32 shots with no POI change. Approx. 12-13 fpe
The other baby is 8lb 1oz and 21.25 inches long, custom made to Gods specs!!!!! Simple a joy to have
Thanks for all the well wishes guys!!!!!
They Are Both Beautiful!! :-* :-*
Congrats again on the better of the two ;)
What type of wood did Michael use there? Love the color, and the finish!!
Congrates on the baby boy and nice gun there.
Very handsome little guy :-*
Very handsome again Congratulations,oh nice gun too. ;)
Very cute young man you and the wife did a fine job. As for the gun the wood is very nice the whole thing came together beautiful. Congrats on both.
Mike
Fine looking Son you have there, maybe he will enjoy that nice p-rod someday too. ;)
Lovely little kid! :-\ makes me want to leave work and go home to kiss mine (they are older, 6 and 10 y.o. )
Michael used Lacewood. This gun is perfectly balanced, very lightweight.
I do like the idea of buying my boy a gun and leaving it in the packaging until the right day to open and teach him some modding!!!!!!
Thank you for the compliments!!!!
So anyone up for making some SS safeties? LOL