Print Page - assembly guide?

Title: assembly guide?
Post by: kraaash on October 26, 2013, 08:04:51 PM

I think I finally have all the parts for both my 13xx and 22xx builds, problem is I have never taken one apart or build one =)
anyone know of any good guides for a full build? I have lots of questions about cleaning/ lock tight/ prep work, ext.

thanks a ton :) trying to get past n00b stage =)

Title: Re: assembly guide?
Post by: mudduck48 on October 26, 2013, 08:27:10 PM

here is part one.
[youtube]https://www.youtube.com/watch?v=aLSnFP1hSEU#]https://www.youtube.com/watch?v=aLSnFP1hSEU#[/url]
here is part two.
[youtube]https://www.youtube.com/watch?v=GUNpGingSxk#]https://www.youtube.com/watch?v=GUNpGingSxk#[/url]
piston and valve mods.
[youtube]https://www.youtube.com/watch?v=uIIG-aa3VrM#]https://www.youtube.com/watch?v=uIIG-aa3VrM#[/url]
This is Croshairs AKA mike the knife.

Title: Re: assembly guide?
Post by: arkmaker † on October 26, 2013, 08:29:24 PM

Here is a cut away. You can also download the EVP diagram from the Crosman website.
If you use loc-tite, use Blue and use it very sparingly. One drop will do you. Do Not use it on the small 4-48 breech screw.

Rich

Title: Re: assembly guide?
Post by: Fronzdan on October 27, 2013, 09:02:06 PM

If you get stuck, I'm sure anything you post here would be answered within minutes during normal hours.

Crosman Air Pistol Owners Forum

Crosman air pistol - General => Crosman air pistol - General discussion => Topic started by: kraaash on October 26, 2013, 08:04:51 PM