Chime in with your ideas. Who knows, maybe someone will take note.
Just a couple ideas to start;
A good set of iron sights for the Crosman steel breech. An adjustable rear and a tall enough push on front for stock barrels and a glue on for shrouded barrels. Maybe out of delrin. Should be easy peasy with cnc. $35 a set
Boyds should come out with grips and forearms for the 13xx and 22xx. $35 for grips, $65 a set.
Wish Crosman would make a pistol like this one http://www.china-airrifle.com/products_detail/&productId=0855eef7-4a94-44d7-8f32-993c92ede535.html (http://www.china-airrifle.com/products_detail/&productId=0855eef7-4a94-44d7-8f32-993c92ede535.html) but with adjustable target grip
Quote from: Brutuz on April 02, 2015, 09:24:46 PM
Wish Crosman would make a pistol like this one http://www.china-airrifle.com/products_detail/&productId=0855eef7-4a94-44d7-8f32-993c92ede535.html (http://www.china-airrifle.com/products_detail/&productId=0855eef7-4a94-44d7-8f32-993c92ede535.html) but with adjustable target grip
Nice! Where can we get one? Price(s)?
Quote from: Noah on April 02, 2015, 10:46:55 PM
Nice! Where can we get one? Price(s)?
http://mrodair.com/new_hot_items_check_it_out_mrodair_s400 (http://mrodair.com/new_hot_items_check_it_out_mrodair_s400)
Barrel mounted rails that slip over the barrel and secure with a grub screw. A metal insert that fills the gap between the barrel and tube.
Quote from: jSan22 on April 03, 2015, 03:37:07 AM
Barrel mounted rails that slip over the barrel and secure with a grub screw. A metal insert that fills the gap between the barrel and tube.
Alchemy has those. They used to be stock parts on the older 13xx guns.
http://www.ebay.com/itm/NEW-OLD-SCHOOL-Crosman-BLACK-BARREL-TUBE-SPACER-TRIM-1322-1377-PC77-Air-Guns-/291053462592?pt=LH_DefaultDomain_0&hash=item43c4236440 (http://www.ebay.com/itm/NEW-OLD-SCHOOL-Crosman-BLACK-BARREL-TUBE-SPACER-TRIM-1322-1377-PC77-Air-Guns-/291053462592?pt=LH_DefaultDomain_0&hash=item43c4236440)
Quote from: crossliner on April 03, 2015, 02:11:43 AM
http://mrodair.com/new_hot_items_check_it_out_mrodair_s400 (http://mrodair.com/new_hot_items_check_it_out_mrodair_s400)
I just received this email message from Shaoxing Air Gun Factory:
Dear Noah
Thank you for your email. Our agent will get CP1-M order at the end of May. then you can buy from them. I am sorry, I don't know about the retail price.
Thank you and have a nice day!
Best regards!
Julie
Shaoxing Snowpeak Air Gun Factory
1280，Chengnan Road,Shaoxing,312000
Zhejiang,China
Tel:0086-575-88907507 Fax:0086-575-88318221
http://www.china-airrifle.com (http://www.china-airrifle.com)
Quote from: crossliner on April 03, 2015, 02:11:43 AM
http://mrodair.com/new_hot_items_check_it_out_mrodair_s400 (http://mrodair.com/new_hot_items_check_it_out_mrodair_s400)
I've been waiting for these to become available...but may wait for the PCP version.
Here's some technical info:
CP-1 available in .177, .22 and .25
http://www.china-airrifle.com/products_detail/&productId=9e5d634d-c2b0-4ca3-a01c-5d3702a28f60.html (http://www.china-airrifle.com/products_detail/&productId=9e5d634d-c2b0-4ca3-a01c-5d3702a28f60.html)
CP-1M available in .177 and .22
http://www.china-airrifle.com/products_detail/&productId=0855eef7-4a94-44d7-8f32-993c92ede535.html (http://www.china-airrifle.com/products_detail/&productId=0855eef7-4a94-44d7-8f32-993c92ede535.html)
.
For the 2240. A 7.5" or 10" barrel with a built in, muted "muzzle brake" or noise reducing shroud..
A larger pump volume 13xx (likely by a larger ID tube).
Bring back the Crosman 140.
Make a carbine with the stroke length of the Crosman 140 and a pump tube ID of 0.75 inches.
I'd like RWS Diana manufacture a gun in .20 cal. so that they would make .20 pellets. The pellet selection for .20 is anemic. RC
Hey guys, been a while, but here's my 2cents: How about a rear cocking bolt for the 22xx, and 13xx series guns especially for those of us that run heavy hammer springs. Something like the Challenger T handle bolt. I actually sheared off a SS bolt handle on a current project due to the heavy hammer spring, and the amount of leverage needed to cock the gun. (PCP based) So when I received a few Challenger 2009's for the 4-H club and saw how nice they handle for lefties, or righties I just thought it would be great if we could have a bolt like that for our other guns.
Casey
I wish someone would develop a steam driven gun!
lol, there is... its fitted to aircraft carriers and shoots planes into the air ! :-*
Quote from: DavidS on April 03, 2015, 03:53:14 PM
A larger pump volume 13xx (likely by a larger ID tube).
Bring back the Crosman 140.
Make a carbine with the stroke length of the Crosman 140 and a pump tube ID of 0.75 inches.
The Chinese could do that. I like the idea of an all metal and wood super pumper along the the lines of the QB rifles.
Metal 3 screw side plate for the new style crosman pistol grip frames
Quote from: 1377x on April 19, 2015, 03:25:17 AM
Metal 3 screw side plate for the new style crosman pistol grip frames
http://www.airgunforum.ca/forums/topic59806-45.html (http://www.airgunforum.ca/forums/topic59806-45.html)
Dang, send Crosman a link to that page and say "Hey, you got a way to make in the USA?" LOL
A relatively low velocity springer (600-800 fps) that requires a maximum of 20 pounds to cock. Low vibration and quiet.
Quote from: Redleg on April 21, 2015, 02:03:45 AM
A relatively low velocity springer (600-800 fps) that requires a maximum of 20 pounds to cock. Low vibration and quiet.
Stoeger X-5 or Beeman R-7. RC