Text only | Text with Images

Crosman Air Pistol Owners Forum

Crosman air pistol - General => Crosman air pistol - General discussion => Topic started by: TennX on December 30, 2015, 03:56:51 PM

Title: 1377 safety ball and spring...
Post by: TennX on December 30, 2015, 03:56:51 PM
Well after working on 5 guns, I only had one safety ball and spring slip out...can these be reinstalled from the top,by taking the grip frame off ...I don't use the safetys but guns should have them...many  thanks
Title: Re: 1377 safety ball and spring...
Post by: JMJinNC on December 30, 2015, 05:40:06 PM
Exactly. Take the frame off. Easiest way.

JMJ
Title: Re: 1377 safety ball and spring...
Post by: TennX on December 30, 2015, 05:57:31 PM
Quote from: JMJinNC on December 30, 2015, 05:40:06 PM
Exactly. Take the frame off. Easiest way.

JMJ

Thanks for the reply..
Title: Re: 1377 safety ball and spring...
Post by: mudduck48 on December 30, 2015, 06:15:49 PM
If you have any, put a little grease in the hole where the ball and spring goes. This will keep the ball and spring from taking off the next time you remove the frame. ;)
Title: Re: 1377 safety ball and spring...
Post by: TennX on December 30, 2015, 06:21:09 PM
Quote from: mudduck48 on December 30, 2015, 06:15:49 PM
If you have any, put a little grease in the hole where the ball and spring goes. This will keep the ball and spring from taking off the next time you remove the frame. ;)

  thanks for the tip....
Text only | Text with Images