This waiting is a killer ! ;) ;) ;D ;D Went down to my shop this evening and went to digging around in my parts
drawer and found a 2250 tube that I had once made a PCP shooter out of, well it now sports a NEW PROD valve and a .177 cal. barrel! It looks like it had been sent for and got LOST on the way back !! ;D ;D ;D ;D ;D ;D I had my son (JOHN) to sand blast it a few weeks back , so its just bare medal . The .177 barrel had been used as a tool to drive a stuck valve out of an old 1377 phase I that I had traded for that was one big RUST BUCKET!! The muzzle was beat almost closed , well I cut it off just a little and recrowned it the breech end just need a little cleaning up. Got it all put together and shot it a few time , NO leaks , shoots hard too ! Got to find me a pistol scope and a good paint job and then I'll post a few pics.! Thinking about I'll try to post some of pics. Friday ! Goin to try to get John to put a cerakote paint job in black on it if he's not to far behind on his other work. He tells me I'm not a paying customer and I have to wait till he as a slack time! ;) ;) He's doing one now for me that I don't have a clue what it's goin to look like! So when its done we'll know at the same time . ;D ;D ;D ;D ;D ;D
Well all that certainly sounds interesting. Keep us updated and we are waiting with bated breath to see what it actually looks like.
Carl
Cool project! You should take pics of each step as you go. Would be cool to see the progress.
Quote from: Tater on February 19, 2016, 02:21:18 AM
Cool project! You should take pics of each step as you go. Would be cool to see the progress.
:-* :-* :-*
O-boy, another parts gun build. Can't wait to see the results. :)
Here we go again...dang show-off! ;)
Certainly sounds interesting. RC
Parts gun yeah ok we"ll see! :D ;D ;D ;D ;D
Quote from: mudduck48 on February 19, 2016, 02:47:26 AM
O-boy, another parts gun build. Can't wait to see the results. :)
Same here :-* :-* :-*
:) Ok guys, I broke her down to send to paint and here is what I've got !! As you can see the air tube I measured for the PROD valve and after that it pretty muchs all falls together ! Here are a few pics. as it is now!!
Uh-oh! Looks like you are the busy bee.
You know your an addict when you have enough left over parts to build another gun. LolCant wait to see the final product.
Quote from: onebaddj on February 20, 2016, 08:05:45 PM
You know your an addict when you have enough left over parts to build another gun. LolCant wait to see the final product.
;D ;D ;D ;D ;D I guess I am what I am !! ;D ;D ;D ;D ;D ;D ;D ;D