Almost finished my 1377 building i want to upgrade the front sight/barrel band but i have some doubt.
I have the stock barrel and the rear LPA MIM sight, so the barrel band should be compatible with the elevation limits of my sight.
I found this http://www.hpasports.com/crosman/1-13xx-pump-arm-pivot-barrel-band-with-fiber-optic-front-sight-black.html , pricey but looks good. or this http://www.network54.com/Forum/79574/message/1337246420/Barrel+Bands+and+Stocks but I don't know if it is still available.
Gmac sells a Brass one but i don't like it
These barrel bands are a custom pin, I hope it reduces the wobble of the pump action.
http://mellonair.myfreesites.net/solid-pins Theses will really help with the wobble. I use his bushings & rings on all my pumpers. Will fit HPA pins.
Sadly Michael Chavka has quit the parts business a year or so ago. So the HPA are the only 13xx bands I know of.
I'll check the MIM sight lines and get back to you.
Quote from: BillK on March 09, 2017, 05:30:32 PM
http://mellonair.myfreesites.net/solid-pins Theses will really help with the wobble. I use his bushings & rings on all my pumpers. Will fit HPA pins.
Sadly Michael Chavka has quit the parts business a year or so ago. So the HPA are the only 13xx bands I know of.
I'll check the MIM sight lines and get back to you.
Thanks
I use a combination of Mellon reinforcing washer, Mellon sleeve, and Alchemy solid pin. Note that drilling the pump arm pivot (NOT the tube) for the Mellon sleeve makes installation a bit more difficult - just a matter of getting things lined up. For the barrel band the 3D printed barrel bank / pivot from Alchemy is very good, very tight, and inexpensive, but not flashy. I have used 25 pumps with the above configuration - It has an FTP.
Also note the additional screws for the barrel band on Part 3 of Wyoman's sticky.
https://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,11149.msg139116.html#msg139116
He used a much more attractive barrel band.
KAR120c, Sorry I thought I had an HPA band but I only have the Chavka bands. So, any measurements will maybe not be the same. I can only think that the bands sight height would be the same as the OEM Crosman sight.
Probably a question to the folks @ HPA would get you an answer if it will work with a MIM sight.
Quote from: BillK on March 10, 2017, 01:42:49 AM
KAR120c, Sorry I thought I had an HPA band but I only have the Chavka bands. So, any measurements will maybe not be the same. I can only think that the bands sight height would be the same as the OEM Crosman sight.
Probably a question to the folks @ HPA would get you an answer if it will work with a MIM sight.
tnx anyway
Quote from: BillK on March 10, 2017, 01:42:49 AM
KAR120c, Sorry I thought I had an HPA band but I only have the Chavka bands. So, any measurements will maybe not be the same. I can only think that the bands sight height would be the same as the OEM Crosman sight.
Probably a question to the folks @ HPA would get you an answer if it will work with a MIM sight.
Does Michael still have a website? I know I have seen it mentioned around here somewhere... ???
Quote from: Noah on March 11, 2017, 04:51:28 AM
Does Michael still have a website? I know I have seen it mentioned around here somewhere... ???
Not anymore. In fact, I bought his last wire stock about a year and a half ago.
Joe
Quote from: kar120c on March 09, 2017, 01:14:31 PM
Almost finished my 1377 building i want to upgrade the front sight/barrel band but i have some doubt.
I have the stock barrel and the rear LPA MIM sight, so the barrel band should be compatible with the elevation limits of my sight.
I found this http://www.hpasports.com/crosman/1-13xx-pump-arm-pivot-barrel-band-with-fiber-optic-front-sight-black.html , pricey but looks good. or this http://www.network54.com/Forum/79574/message/1337246420/Barrel+Bands+and+Stocks but I don't know if it is still available.
Gmac sells a Brass one but i don't like it
These barrel bands are a custom pin, I hope it reduces the wobble of the pump action.
Before Christmas an ad was put up in the for sale section for a nice 1377 with several upgrades including a Chavka barrel band, it is still there and not marked sold.
I think you need a few more posts to access that section.
https://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,17071.0.htm
The barrel bands at HPA sports are made by Bluefork. I have had two different Bluefork parts (not barrel bands) and both are good parts. When Chavka was still selling barrel bands they were about the same price as the Bluefork ones are now at HPA, I know because I purchased one then, which was about 5 years ago.
I think either one would be nice on a 13xx project, the fiber optic rod on top really helps with aiming, with the LPA rear sight.
+1 on the Bluefork parts. Very well made.
Dennis
Quote from: plasticclassic on March 11, 2017, 07:17:51 AM
Before Christmas an ad was put up in the for sale section for a nice 1377 with several upgrades including a Chavka barrel band, it is still there and not marked sold.
I think you need a few more posts to access that section.
https://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,17071.0.htm
The barrel bands at HPA sports are made by Bluefork. I have had two different Bluefork parts (not barrel bands) and both are good parts. When Chavka was still selling barrel bands they were about the same price as the Bluefork ones are now at HPA, I know because I purchased one then, which was about 5 years ago.
I think either one would be nice on a 13xx project, the fiber optic rod on top really helps with aiming, with the LPA rear sight.
I have the said rear sight and a Chavka/Blue Fork front end sight/crown saver that I was just going to put up for sale. I'll take a pic and share sometime tonight if not tomorrow. :-*
With the barrel band i want a new pin too. I have read that the pin holes are misaligned and is necessary to drill to enlarge them. Is it true?
I had to enlarge the pin holes a bit using the Chavka barrel bands & his pins. However I have heard that the newer pump tubes were drilled a bit and enlargement wasn't necessary. I don't know if that is true but, all you need is a drill & bit for the hole & some sandpaper to smooth out the holes so the pump piston is not gouged.
The pump pin comes with the barrel band......I think?
Quote from: kar120c on March 16, 2017, 09:12:16 PM
With the barrel band i want a new pin too. I have read that the pin holes are misaligned and is necessary to drill to enlarge them. Is it true?
Yes, just a little bit but don't worry as I am THE worst tinkerer around and even I was able to pull it off. For the price it is THE best investment for your pumper(s). :-*
Take a look here. http://www.network54.com/Forum/275684/thread/1489815005/last-1489896824/View+Thread
Scroll down to the Green 1322. Looks like the HPA barrel band works with a MIM sight.
Quote from: Noah on March 15, 2017, 05:25:59 AM
I have the said rear sight and a Chavka/Blue Fork front end sight/crown saver that I was just going to put up for sale. I'll take a pic and share sometime tonight if not tomorrow. :-*
Although a bit late, here are the two parts I mentioned earlier. If you are interested, simply make me an offer (or a trade for something I don't need?) and we can go on from there. The crown saver/front end sight is made of aluminum and was purchased from Mike years ago (I totally forgot I had it).
Sorry about the lack of quality of the pics. ???
http://www.hpasports.com/3-crosman
Quote from: BillK on March 19, 2017, 02:54:10 PM
Take a look here. http://www.network54.com/Forum/275684/thread/1489815005/last-1489896824/View+Thread
Scroll down to the Green 1322. Looks like the HPA barrel band works with a MIM sight.
tnx :-*
Quote from: Noah on March 21, 2017, 08:20:49 AM
Although a bit late, here are the two parts I mentioned earlier. If you are interested, simply make me an offer (or a trade for something I don't need?) and we can go on from there. The crown saver/front end sight is made of aluminum and was purchased from Mike years ago (I totally forgot I had it).
Sorry about the lack of quality of the pics. ???
http://www.hpasports.com/3-crosman
Thank you but I already have the MIM sight and I am looking for the HPA Barre Band with front sight