Text only | Text with Images

Crosman Air Pistol Owners Forum

Crosman air pistol - General => Crosman air pistol - General discussion => Topic started by: slider on June 13, 2011, 06:18:47 PM

Title: Trigger
Post by: slider on June 13, 2011, 06:18:47 PM
OK so what is it that I need to do to the trigger on my new 2240. I would like to do the work myself..Just need guildence..I`m a dummy O I mean a Nubie !!!!
Title: Re: Trigger
Post by: Crosshairs on June 13, 2011, 09:53:43 PM
Ok just polish all friction points shim the trigger and sear get a lighter spring from mellon or one of the other guys on our link page. ! That should do it.
                                    Mike
Title: Re: Trigger
Post by: slider on June 13, 2011, 10:47:59 PM
How do you shim the trigger and shear...sorry.
Title: Re: Trigger
Post by: tatsumi on June 14, 2011, 01:14:38 AM
Shims are just a way to pack out the gaps so for example i use 0.5mm steel washers of about 5mm diameter. one on each side of the trigger will do and i use only one on the sear(bit that engages the hammer and trigger).
I tried too but its a little tight at that.
The GMAC trigger is 3mm thick for both sear and trigger and the stock oem ones are... well a little off that so you have to pack it out.
Title: Re: Trigger
Post by: slider on June 14, 2011, 01:49:23 AM
Thank you !!!!
Text only | Text with Images