I ordered this new scope from Amazon for $90. Looked like a great deal. Hopefully it will feel right at home on my 2300 KT when it arrives. If not, Since it is airgun rated, I can always mount it on my Phantom 1000.
Here is the URL for more information on the scope
*I haven't yet figured out which rings I should order i.e.: low, medium or high, any suggestions?
http://www.opticstore.com/VISM%20Scopes.htm (http://www.opticstore.com/VISM%20Scopes.htm)
I hope it works out for you. I'm getting excellent results with an NC Star 2.5 x 30 on my 2240; $30. RC
either medium or high will work, but i would personally use high . as to which brand BKL are probably the best but for a price .leapers/utg has cheap ones that will do the job.
i would go high mounts,also!
I would highly recommend the BKL mounts. Second to none but a little pricey. And do get the high ones like these.
http://www.bkltech.com/1x0-6-Wide-Dovetail-High-Rings-p/bkl-257h.htm (http://www.bkltech.com/1x0-6-Wide-Dovetail-High-Rings-p/bkl-257h.htm)
Carl
I ordered these because they had the vertical stop pin. Came out pretty economical with the discount.
http://www.pyramydair.com/s/a/Leapers_Accushot_1_Rings_High_9_5_11_5mm_Dovetail/635 (http://www.pyramydair.com/s/a/Leapers_Accushot_1_Rings_High_9_5_11_5mm_Dovetail/635)
Unless you are shooting a springer you really do not need the stop pin. Most folks just take them out and toss them away.
Carl
Quote from: quickster47 on December 03, 2011, 12:16:15 AM
Unless you are shooting a springer you really do not need the stop pin. Most folks just take them out and toss them away.
Carl
I'll probably use it on the Phantom 1000 that's why I thought it would be a good idea to get the stop pin. The main reason reason I got to scope is it was airgun rated and will be able to take the shock of the springer.
Quote from: quickster47 on December 03, 2011, 12:16:15 AM
Unless you are shooting a springer you really do not need the stop pin. Most folks just take them out and toss them away.
Carl
Don't see why, might come a time when the pin is needed if you're swapping stuff around. ;)
On, but a bit off topic : Besides, I know of a feller over on RFC who equipped a Chipmunk with a huge Barsaka scope and had to use similiar rings, with the stop pin. I could understand, the rings keep moving on mine, err, the cat's too (yea, she "appropriated" it one night from me -
I had a picture, but can't find it at the moment) . . .
http://www.rimfirecentral.com/forums/showthread.php?t=360527&highlight=Worlds+smallest+sniper+rifle (http://www.rimfirecentral.com/forums/showthread.php?t=360527&highlight=Worlds+smallest+sniper+rifle)
I have been looking for such an item for a while - good find and will be ordering one soon. Again, good find!
Decided that the scope with a laser was an overkill so I sent it back. So I'm back to searching for a suitable scope for my wife's 2300KT
Quote from: Themajickman on December 09, 2011, 10:21:08 PM
Decided that the scope with a laser was an overkill so I sent it back. So I'm back to searching for a suitable scope for my wife's 2300KT
The 2300kt is a competition gun for some people, I have even seen it in Field Target.
Once you get your scope, it should be super accurate. 8)