Well I got the .050 Allen Wrench and it had a rounded end,not a square one.
So I used the Dremal to square it up,and carefull not to get it hot. It seemed just a little loose,but this is the size to use I was told. Tapped on the wrench a couple of times. And Im not going to go into details but Where do I get SS Replacement Screws??? I have looked for almost 2 hours in the Search Function and the only one I found was AC and the link doesn't work. I just new this was going to happen!!
Someone on the forum had some screws available. I don't remember whom it was. Hopefully they will speak up. Or you can message me with your address and I'll send a couple. I have a few extra philips head ones. You may have to grind the head small to fit properly.
Glen
You get 'em from Crosman.
http://www.crosman-air-pistol-owners-forum.com/board/index.php?topic=6601.msg74069;topicseen#msg74069 (http://www.crosman-air-pistol-owners-forum.com/board/index.php?topic=6601.msg74069;topicseen#msg74069)
you could try these the head might need to be turned down and lenght shortened
http://www.amazon.com/dp/B000FN214U/ref=biss_dp_t_asn (http://www.amazon.com/dp/B000FN214U/ref=biss_dp_t_asn)
Quote from: Nightsniper52 on May 13, 2012, 07:17:46 AM
Well I got the .050 Allen Wrench and it had a rounded end,not a square one.
So I used the Dremal to square it up,and carefull not to get it hot. It seemed just a little loose,but this is the size to use I was told. Tapped on the wrench a couple of times. And Im not going to go into details but Where do I get SS Replacement Screws??? I have looked for almost 2 hours in the Search Function and the only one I found was AC and the link doesn't work. I just new this was going to happen!!
McMaster-Carr part# 91792A741 pkg of 50 for $8.02. You will have to put the screw in a drill and turn the head down just a little to make it fit the countersink in the breech. These are slotted screws. The length is fine as is, they are 1/4" long and 4-48 thread.
Thanks!! Do you have a Link?? :)
Quote from: Sir William on May 13, 2012, 02:14:54 PM
You get 'em from Crosman.
Im trying to get away from those little allen screws
Quote from: Nightsniper52 on May 14, 2012, 05:17:13 AM
Thanks!! Do you have a Link?? :)
http://www.mcmaster.com/#machine-screw-fasteners/=hiw5fq (http://www.mcmaster.com/#machine-screw-fasteners/=hiw5fq)
Pan head Slotted machine screws (be sure to choose the 4-48 option)
Thanks !
Quote from: tinker on May 13, 2012, 12:40:04 PM
Someone on the forum had some screws available. I don't remember whom it was. Hopefully they will speak up. Or you can message me with your address and I'll send a couple. I have a few extra philips head ones. You may have to grind the head small to fit properly.
Glen
Whoa! Please hold a couple for me still! :-*
Noah, yours are in a bag waiting!
Glen
Sorry for jacking the thread :)
I just ordered a few when I ordered a trigger Shoe... :-*