part number 150-013
what size screw would suit this
i can cut it to the right length
but what diameter/size are the threads
where does it go?
it holds in the right hand side of the gun, at the centre
it holds the valve cylinder in place
i know where you can order that screw from.if you want to try a hardware store screw ill check with the shop he knows the size
i'll try the hardware, please
any tips ?
im about to call the air gunsmith now forgot about this
It's a #8-32 x .412 machine screw. A #8-32 x 1/2 Slotted Oval Headed machine screw can be cut to the correct length.
Quote from: cmj21973 on September 01, 2012, 08:08:17 AM
It's a #8-32 x .412 machine screw. A #8-32 x 1/2 Slotted Oval Headed machine screw can be cut to the correct length.
glad you found that out .all i could do is get a factory screw and couldnt get the size of it!
I'm restoring one, so I just measured it. :-*
Thanks guys