hey all new steel breech on my 1377 can i mount this sight on it ,will it be in the way of putting pellets in,is it worth the money ??? thanks
http://www.airsoftbunker.com/1x25-red-and-green-dot-reflex-sight-weaver-and-38-dovetail-basesilver (http://www.airsoftbunker.com/1x25-red-and-green-dot-reflex-sight-weaver-and-38-dovetail-basesilver)
yes it will
if you have 459 mounts or a breech with dovetail mounts like a crosman steel breech or 90% of the other aftermarket breeches out there
Because the sight you are looking at also has the ability to mount on the 3/8" dovetail it will work on your Crosman long steel breech. However, loading pellets will be a problem because there will not be much room beneath the sight base.
The sight has a length of 4.5" and a mounting base of 4.06" placing it over the loading port. Better to find one that will mount on just the front section of the long steel breech.
Carl
Maybe BigErn will check in on this one. I recall he has the same sight on a 13xx or 22xx gun.
Quote from: breakfastchef on January 20, 2013, 12:40:26 AM
Maybe BigErn will check in on this one. I recall he has the same sight on a 13xx or 22xx gun.
i have this site on a gun here too
couldnt recall who it was that had it
you think i could get away with using one mount,and push the sight towards the front of barrel to open up where i load the pellets ??? i have fat fingers
Quote from: tipper1 on January 20, 2013, 02:35:13 AM
you think i could get away with using one mount,and push the sight towards the front of barrel to open up where i load the pellets ??? i have fat fingers
Personally, I don't think so because with one mounting point your sighting device will not be that stable. Better bet would be to find a different sighting device.
Not sure why 1377x didn't answer your original question about will it interfere with the loading port.
But again, I really think it will simply because it appears to be a low profile type of mount.
Carl
Quote from: quickster47 on January 20, 2013, 02:53:31 AM
Personally, I don't think so because with one mounting point your sighting device will not be that stable. Better bet would be to find a different sighting device.
Not sure why 1377x didn't answer your original question about will it interfere with the loading port.
But again, I really think it will simply because it appears to be a low profile type of mount.
Carl
here is the complete answer to the question,then ;)
hope it satisfies any doubts if it will fit or gets in the way of loading
nothing better than a visual
http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,8197.msg88705.html#msg88705 (http://www.crosman-air-pistol-owners-forum.com/board/index.php/topic,8197.msg88705.html#msg88705)
Also take note of what BigErn said about the dot size, it's huge!
Carl
thanks 13xx for the post that's what i was looking for.well back to the internet huge dot will not work for me,guess i need to look for a 3 moa dot, really liked the silver too.thanks all for your help sure glad i asked. 8)
Sorry I am late on this, that sight will work on the Crosman breech and it does not get in the way of the loading port. However, the dot on the sight is HUGE! More like 8 MOA. It's ok with the green dot on the max setting outdoors since you can see the target THROUGH the dot. The red dot has to be on the lowest setting to see the target again THROUGH the dot. I can't really recommend this sight but it does look cool and it was cheap. Great for plinking cans and spinners but not good for target shooting.
Sounds like it would be a reasonable addition to the Backpacker Bugout Kit that was on sale at Walmart and various other places.
It would definitely add a level of visual coolness to the 1322 along with the quick disconnect stock.
Of course one would need to add the Crosman long steel breech but that would be okay.
Carl
thanks BigErn,looking for the cool factor plus kill zone (seeing it) ,3/8 mounts hard to find in a mini.
Quote from: tipper1 on January 20, 2013, 01:54:43 PM
thanks 13xx for the post that's what i was looking for.well back to the internet huge dot will not work for me,guess i need to look for a 3 moa dot, really liked the silver too.thanks all for your help sure glad i asked. 8)
a millet sp-1 should work for you
it used to come in silver but know about now
it is listed as 3moa from millet and the dot isnt that big
just replace the 1" weaver rings it comes with,th ereplacement rings would be 1" 3/8 dovetail rings also known as 22lr rings or air gun rings
http://www.millettsights.com/scopes/sp-series-red-dot/ (http://www.millettsights.com/scopes/sp-series-red-dot/)
I've been looking at this for awhile... http://www.ebay.com/itm/370630246818?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 (http://www.ebay.com/itm/370630246818?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649)
I'm not to keen on the price...yet.
http://www.midwayusa.com/product/510065/millett-compact-red-dot-sight-1-tube-1x-3-moa-dot-with-weaver-style-rings-silver (http://www.midwayusa.com/product/510065/millett-compact-red-dot-sight-1-tube-1x-3-moa-dot-with-weaver-style-rings-silver)
Quote from: 7624452 on January 21, 2013, 01:33:47 AM
http://www.midwayusa.com/product/510065/millett-compact-red-dot-sight-1-tube-1x-3-moa-dot-with-weaver-style-rings-silver (http://www.midwayusa.com/product/510065/millett-compact-red-dot-sight-1-tube-1x-3-moa-dot-with-weaver-style-rings-silver)
Is this the same one? Better price.
http://www.midwayusa.com/product/510065/millett-compact-red-dot-sight-1-tube-1x-3-moa-dot-with-weaver-style-rings-silver (http://www.midwayusa.com/product/510065/millett-compact-red-dot-sight-1-tube-1x-3-moa-dot-with-weaver-style-rings-silver)
The millett comes with weaver rings. You can mount it to a Crosman steel breech with any 1" 3/8-11mm scope rings.
What is the difference between these 2 scopes? RD00004 & RD00904?
http://www.millettsights.com/scopes/sp-series-red-dot/ (http://www.millettsights.com/scopes/sp-series-red-dot/)
http://www.ebay.com/itm/221178658136?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 (http://www.ebay.com/itm/221178658136?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649)
Well,I would say one ( 004 ) is matte and the other ( 904 ) is silver ;).
Thanks Bill thats what i needed to hear :-*
The black and silver are 004 and 094 is there a difference,I can't tell :-*
Fairly low profile but... when enlarging the pic of that sight, it appears that those lower mounts also fit into a dovetail in the main rail and come apart (2 pcs) and can be flipped over for weaver or 3/8" so... theoretically both clamps could be moved together along the lower sight to match the length of the forward dovetail on your pistol and give it more stability than one mount alone. You may not like the parallax or sight picture however with it that far forward?
looking to get these mounts :-
http://www.amazon.com/gp/product/images/B000205TIQ/ref=dp_image_0?ie=UTF8&n=3375251&s=sporting-goods (http://www.amazon.com/gp/product/images/B000205TIQ/ref=dp_image_0?ie=UTF8&n=3375251&s=sporting-goods)
WOW... Those are Really Nice!!
They have a nice design. What do those cost?
http://www.natchezss.com/brand.cfm?brand=BQ#q%3Ddemos%26catl%3D1%26p%3D1%26ci%3DBrand%253D1%253AMillett%26Brand%3DMillett (http://www.natchezss.com/brand.cfm?brand=BQ#q%3Ddemos%26catl%3D1%26p%3D1%26ci%3DBrand%253D1%253AMillett%26Brand%3DMillett)
Brent they are 20.00 you google you can find cheaper,thanks Art just put in order nice site :-*