Trigger work

[blake.l]

Thought I'd do a little work on my CCS gun. The trigger is in very good shape from factory not to loose or to tight. I did adjust on the spring some but still seemed a little to stiff even with the adjuster bottomed out so I started cutting I'm not sure how much I cut off but you can see where I'm at and is a VERY light pull!! I cleaned up everything and de-burred all the parts and adjusted the trigger stop. I'm very satisfied with the smoothness now I done the bump test and all was fine..

[breakfastchef]

Polish and lube all the contact points in the trigger group and you will have done all that you can resonably do to greatly improve the stock trigger. Excellent job!