• Welcome to Crosman Air Pistol Owners Forum.

1377 hard to cock.

Started by guyross, March 01, 2013, 07:20:22 PM

0 Members and 2 Guests are viewing this topic.

1377x

ok enough of this chief talk!!!!!!!!!!!!!!!! >:(
just cut a few threads off the screw you have and it should be fine
closed mouths dont get fed

guyross

Quote from: tnpaw on March 01, 2013, 07:45:44 PM
Did you drill and tap the old bolt handle out! If you did you may have swelled the hole in the probe a little! And I 2nd what BDS said! About the screws maybe being to long! Hitting Hammer or spring or both! You will probably have to take apart and check for signs of something being hit! Also check your probe bolt, sometimes they can be just a little Fat! And need to be dressed up a bit!....John  ???
Sorry I didn't say I installed a long breech from Crosman that included a bolt and separate handle. And that I upgraded the cap screws with SS hex screws. Thanks for the great response to this nubies problem. I will shorten the screws. Now I think back this started after that mod.

Guy   

guyross

It was the rear breech screw. Thanks and stand by for more questions from a newbie. It's fun a addictive with no cure in the near future.

Guy 

tinker

Good to hear it was the screw length.  I believe that just about everyone has been on that road myself included more than once :-X

Glen
(Tinker)
If it's not broken then modify it!

quickster47 †

Quote from: tinker on March 02, 2013, 02:58:18 AM
Good to hear it was the screw length.  I believe that just about everyone has been on that road myself included more than once :-X

Glen

Yep, that is the kind of 'bad' screwing that none of us need, ever.

Carl

I've never wanted something so useless in my life.
In Omnia Paratus
1947-05-19 - 2016-07-14 †

JEBert

QuoteF-Troop
Lord help us!
Jerry
NRA Life Member
USAF Veteran 1973-1977 (43151E) Sgt (E-4)


Crosshairs

Quote from: tinker on March 02, 2013, 02:58:18 AM
Good to hear it was the screw length.  I believe that just about everyone has been on that road myself included more than once :-X

Glen
Yep i bent the hammer spring once.
                         Mike
Treat people the way you want to be treated, Life will be so much better !!!

quickster47 †

^^^ Did the same thing and then went so far as to break of the brass bolt handle I had.  Too dumb...  :-[

Carl

I've never wanted something so useless in my life.
In Omnia Paratus
1947-05-19 - 2016-07-14 †

WyoMan

I did the same thing too with my first steel breech.....we all must think alike  :D
Wyo
Welcome to your life :)
Member of the Western Heretic Alliance

quickster47 †

Quote from: WyoMan on March 04, 2013, 04:08:58 AM
I did the same thing too with my first steel breech.....we all must think alike  :D
For sure... it is one of those Crosmanitis things we all suffer from.   :D

Actually I'm not sure we suffer from it but rather we enjoy it...  :)

Carl

I've never wanted something so useless in my life.
In Omnia Paratus
1947-05-19 - 2016-07-14 †