1st order from Crosman for 1377. What do I "need"?

[WhiteHot]

Just getting started modding my 1377 and am going to place an order with Crosman for a few things. I am compiling a list of things that I may need in the future of modding/repairing. I plan to do an extended barrel for use with shroud, new pump arm, and flat top valve/piston soon.

What bits and pieces should I get?

[rangerfredbob]

Get a longer barrel from them (only option for .177 is 24" that's longer than the stock 10", that's part # 1760SE-001 $19.07), might as well pick up a spare valve (PN 1322C013, was $6.08 in August), front sight PN 788-101 $1.54, shoulder stock PN 1399A001 $10.87, 760 front barrel band PN 760D008 $1.15, grips Left PN 1700-031 right 1700-032 $1.74 per side

I haven't bought a backpacker pump arm so I don't have that price or part number handy... That's the cheapest way to get parts, might as well make use of the $4 shipping

[bgmcgee]

Throw in a few breech seals. Steel breech maybe a couple of extra valve stems and check valves.

[BillK]

Safety spring & ball!!!

[WhiteHot]

Awesome  adding to my list! I am going to also play around with a 22 conversion so I will throw the parts I need for that in.

[mudduck48]

The 2289G forearm part number is 1389-025. They were $8.75 ea last time I bought one.

[Cwlongshot]

Safety spring & ball!!!

YES YES!  Get a couple of those %&@# safety balls!! 

I would not have this gun with out a steel breech... if your a Righty, buy a LEFT breech!! 

CW

[Tater]

The 2289G forearm part number is 1389-025. They were $8.75 ea last time I bought one.

That is a "must have", along with the extra safety spring and ball like Bill mentioned.

[WhiteHot]

I am definitely going to the pump arm from the 2289. I am going to pair it with some grips from a 1701.i had me heart set on a nice set of wood furniture but the lack of availability is making me go the other way. It will leave more funds for other stuff too.

[T191032]

Thanks, need to get my order list in . . . order   

[WhiteHot]

So this is on my list so far:

Disco hammer spring   1761-009       
1377 trigger spring   1377-080    
2289 forearm          1389-025               8.75
black stock           1399a001               10.87
1701p grips           1700-031 and 1700-032  1.75
177 24" barrel        1760SE-001             19.07
Valve                 1322C013               6.08
2289 22 14.5" barrel  2289-001    
safety detent spring  1322-017    
Safety Ball           105-039    
rear frame screw      1322a029    
breech seal           130-036    
2289 barrel band      788b011    
2289 barrel screw     781a012       

not going to buy but for future reference....         
1701 trigger conversion      
Grip Frame      2220-103    35.08
Hammer          CH2009A009  19.47

[mudduck48]

IMO, one thing you really need is a real good .050 allen wrench to remove that dam 4-48 breech screw. Then you need to PM me with your address and I will send you a SS slotted 4-48 breech screw. This is what we do on this forum, we help each other out.   

[K.O.]

I saw a 14.5" .22 barrel

that needs a .22 bolt...

I ordered seals and pump cups just in case...

the first thing I did though was to get solid pump pivot pins in my opinion  a  MUST...

[WhiteHot]

I have the upgraded steel breech on my 1377.i couldn't find a part number for a 22 Cal bolt that would work with it. Anyone have it? I am probably goingto do an aftermarket one eventually. Same with the pump pin. After my Crosman order, I need to send some emails 

[rangerfredbob]

Yep, 2261-002 is the discovery .22 bolt I believe and is $3.35