Crosman LPA Mim Rear Sight installation/removal

[Mort Canard]

I bought a 1377 with a steel breech and a Crosman LPA Mim Rear Sight.  I am planning on replacing the sights with a scope and don't see right off how the LPA sight comes off. How is this sight installed and removed?

[MavStone]

From the top view of the sight you'll see to small holes, insert an allen/hex wrench and turn counter clockwise to loosen the set screws.
Slide the sight to the right or left to remove from the breech.

[Mort Canard]

From the top view of the sight you'll see to small holes, insert an allen/hex wrench and turn counter clockwise to loosen the set screws.
Slide the sight to the right or left to remove from the breech.

Tricky, tricky!  I would not have guessed that there are allen set screws in there. 

Thanks!
Mort

[ped]

Allen key is a 1.5mm one and the sight needs to be in the lowest position(mine does)for the Allen key to fit into the grubscrews'
ped

[MavStone]

Tricky, tricky!  I would not have guessed that there are allen set screws in there. 

Thanks!
Mort

I know,.. I battled with that one for a long while....
Glade I could help!

TomD